Rohde & Schwarz FSV3000, User Manual

Page: 45 / 1489

Getting started
R&S
®
FSVA3000/ R&S
®
FSV3000
45 User Manual 1178.8520.02 ─ 08
3.2.4 Setting up the R&S FSV/A
The R&S FSV/A is designed for use on a bench top or in a rack.
See also:
●
"Setting up the product" on page 34
●
"Intended use" on page 33
3.2.4.1 Placing the R&S FSV/A on a bench top
To place the product on a bench top
1. Place the product on a stable, flat and level surface. Ensure that the surface can
support the weight of the product. For information on the weight, see the data
sheet.
2. CAUTION! Foldable feet can collapse. See "Setting up the product" on page 34.
Always fold the feet completely in or out. With folded-out feet, do not place any-
thing on top or underneath the product.
3. WARNING! A stack of products can fall over and cause injury. Never stack more
than three products on top of each other. Instead, mount them in a rack.
Stack as follows:
● It is best if all products have the same dimensions (width and length).
● The overall load on the lowest product must not exceed 500
N.
● With smaller products on top of the lowest product, the overall load on the low-
est product must not exceed 250 N.
4.
NOTICE! Overheating can damage the product.
Prevent overheating as follows:
● Keep a minimum distance of 10 cm between the fan openings of the product
and any object in the vicinity.
● Do not place the product next to heat-generating equipment such as radiators
or other products.
Preparing for use