Rohde & Schwarz FSV3000, User Manual

Page: 908 / 1489

Remote commands
R&S
®
FSVA3000/ R&S
®
FSV3000
908 User Manual 1178.8520.02 ─ 08
Parameters for setting and query:
<SBGaps> AB | BC | CD | DE | EF | FG | GH
Name of the gap, defined by the letters of the surrounding sub
blocks (e.g. "AB" for the gap between sub blocks A and B).
Example: SENS:POW:ACH:FILT-ALPH:GAP:MAN:LOW BC,0.25
Example: See "Example: configuring and performing an asymmetrical
MSR ACLR measurement" on page 920
Manual operation: See "Weighting Filters" on page 197
[SENSe:]POWer:ACHannel:FILTer:ALPHa:GAP<gap>:MANual:UPPer <SBGaps>,
<Alpha>
[SENSe:]POWer:ACHannel:FILTer:ALPHa:GAP<gap>:MANual:UPPer? <SBGaps>
This command defines the roll-off factor for the specified upper gap channel's weight-
ing filter.
This command is only available for for asymmetrical (manual) configuration of gap
channels (see
[SENSe:]POWer:ACHannel:GAP<gap>:MODE
on page 891).
Suffix:
<gap>
.
1 | 2
Gap channel number
Parameters:
<Alpha> Roll-off factor
Range:
0 to 1
*RST: 0.22
Parameters for setting and query:
<SBGaps> AB | BC | CD | DE | EF | FG | GH
Name of the gap, defined by the letters of the surrounding sub
blocks (e.g. "AB" for the gap between sub blocks A and B).
Example: SENS:POW:ACH:FILT:ALPH:GAP2:MAN:UPP BC,0.25
Example: See "Example: configuring and performing an asymmetrical
MSR ACLR measurement" on page 920
Manual operation: See "Weighting Filters" on page 197
[SENSe:]POWer:ACHannel:GCHannel[:STATe]:GAP<gap>:MANual:LOWer
<SBGaps>, <State>
[SENSe:]POWer:ACHannel:GCHannel[:STATe]:GAP<gap>:MANual:LOWer?
<SBGaps>
Defines which lower gap channels are active in the specified gap.
Configuring and performing measurements