Rohde & Schwarz FSV3000, User Manual

Page: 1177 / 1489

Remote commands
R&S
®
FSVA3000/ R&S
®
FSV3000
1177 User Manual 1178.8520.02 ─ 08
Suffix:
<n>
.
Window
<m> Marker
Parameters:
<Trace> 1 to 6
Trace number the marker is assigned to.
Example: //Assign marker to trace 1
CALC:MARK3:TRAC 2
Manual operation: See "Assigning the Marker to a Trace" on page 337
CALCulate<n>:MARKer<m>:X <Position>
This command moves a marker to a specific coordinate on the x-axis.
If necessary, the command activates the marker.
If the marker has been used as a delta marker, the command turns it into a normal
marker.
Suffix:
<n>
.
Window
<m> Marker
Parameters:
<Position> Numeric value that defines the marker position on the x-axis.
The unit depends on the result display.
Range:
The range depends on the current x-axis range.
Default unit: Hz
Example: CALC:MARK2:X 1.7MHz
Positions marker 2 to frequency 1.7 MHz.
Manual operation: See "Marker 1/Marker 2/Marker 3/Marker 4" on page 317
See "Marker 1/Marker 2/Marker 3" on page 322
See "Marker Position X-value" on page 336
See "Marker Table" on page 503
See "Marker Peak List" on page 504
12.8.3.2 General marker settings
The following commands control general marker functionality.
Remote commands exclusive to general marker functionality
DISPlay[:WINDow<n>]:MTABle
......................................................................................1178
DISPlay[:WINDow<n>]:MINFo[:STATe]
........................................................................... 1178
CALCulate<n>:MARKer<m>:X:SSIZe
.............................................................................1178
Analyzing measurements (basics)