Applications, measurement channels
R&S
®
FSVA3000/ R&S
®
FSV3000
127
User Manual 1178.8520.02 ─ 08
The default application is a Spectrum measurement.
Optional applications require additional licenses. The application selection in the
"Mode" dialog box depends on which licenses are available. If the predefined number
of available licenses for a particular option are currently occupied by other users, you
cannot open a further instance of the optional application until a license is returned.
Per option, you only require a single license for any number of channels.
For more information, see
Chapter 10.8.2, "Licensing, versions and options"
Switching between applications
When you switch to a new application, a set of parameters is passed on from the cur-
rent application to the new one:
●
center frequency and frequency offset
●
reference level and reference level offset
●
attenuation
After initial setup, the parameters for the measurement channel are stored upon exiting
and restored upon re-entering the channel. Thus, you can switch between applications
quickly and easily.
Selecting the applications
