Rohde & Schwarz FSV3000, User Manual

Page: 254 / 1489

Measurements and results
R&S
®
FSVA3000/ R&S
®
FSV3000
254 User Manual 1178.8520.02 ─ 08
Selecting Storage Location - Drive/ Path/ Files ...........................................................254
File Name ....................................................................................................................254
Load Standard .............................................................................................................254
File Explorer ................................................................................................................ 254
Save Standard ............................................................................................................ 254
Delete Standard .......................................................................................................... 255
Restore Standard Files ............................................................................................... 255
Selecting Storage Location - Drive/ Path/ Files
Select the storage location of the file on the instrument or an external drive.
The default storage location for the SEM settings files is:
C:\Program Files\Rohde-Schwarz\FSV3000\<version>\sem_std
.
Note: Saving instrument settings in secure user mode.
In secure user mode, settings that are stored on the instrument are stored to volatile
memory, which is restricted to 256
MB. Thus, a "memory limit reached" error can occur
although the hard disk indicates that storage space is still available.
To store data permanently, select an external storage location such as a USB memory
device.
For details, see
Chapter 3.2.15, "Protecting data using the secure user mode" ,
on page 55.
Remote command:
MMEMory:CATalog
on page 1251
File Name
Contains the name of the data file without the path or extension.
By default, the name of a user file consists of a base name followed by an underscore.
Multiple files with the same base name are extended by three numbers, e.g.
limit_lines_005
.
File names must be compatible with the Windows conventions for file names. In partic-
ular, they must not contain special characters such as ":", "*", "?".
For details on the filename and location, see Chapter 9.3.2.2, "Storage location and fil-
ename" , on page 642.
Load Standard
Loads the selected measurement settings file.
Remote command:
[SENSe:]ESPectrum<sb>:PRESet[:STANdard]
on page 928
File Explorer
Opens the Microsoft Windows File Explorer.
Remote command:
not supported
Save Standard
Saves the current measurement settings for a specific standard as a file with the
defined name.
Spectrum emission mask (SEM) measurement