Rohde & Schwarz FSV3000 User Manual Download Page 753

Page: 753 / 1489

General instrument setup

R&S

FSVA3000/ R&S

FSV3000

753

User Manual 1178.8520.02 ─ 08

This data is stored to the C:\R_S\INSTR\USER directory on the instrument.

The file name consists of the unique device ID and the current date and time of the file
creation.

If you contact the Rohde

Schwarz support to get help for a certain problem, send

these files to the support in order to identify and solve the problem faster.

Remote command:

DIAGnostic:SERVice:SINFo?

on page 1348

Save Device Footprint

Creates an

*.xml

file with information on installed hardware, software, image and

FPGA versions. The

*.xml

file is stored under

C:\Program Files\Rohde-Schwarz\FSV3000\<version>\devicedata\xml\

on the instrument. It is also included in the service ZIP file (see

Remote command:

Last Service Date

Opens a calendar to define the date that the R&S

FSV/A was inspected by

Rohde

Schwarz service. The service date is updated by the service technicians. For

new instruments, the last service date (= date of production) is entered during produc-
tion.

If the field contains no date, we recommend that you enter the date of last service
according to the service certificates you received after the R&S

FSV/A has been serv-

iced.

If the R&S

FSV/A has not been serviced yet, leave the field empty.

Remote command:

DIAGnostic:SERVice:DATE

on page 1339

Last Calibration Date

Opens a calendar to define the date that the R&S

FSV/A was calibrated. For new

instruments, we recommend to enter the factory calibration date specified on the cali-
bration certificate.

Remote command:

DIAGnostic:SERVice:CALibration:DATE

on page 1338

Next Calibration Due

Opens a calendar to define the date that the R&S

FSV/A needs its next calibration.

The recommended calibration interval is specified in a read only field next to this input
field.

This date must always be configured by the customer due to ISO17025.

Remote command:
Set date:

DIAGnostic:SERVice:CALibration:DUE:DATE

on page 1339

Recommended interval:

DIAGnostic:SERVice:CALibration:INTerval?

on page 1339

Service functions

Summary of Contents for FSV3000


















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for FSV3000

Reviews:

Brands by name

Popular brands

Rohde & Schwarz FSV3000, User Manual

Search results

Summary of Contents for FSV3000

Reviews:

Brands by name

Popular brands