Rohde & Schwarz FSV3000, User Manual

Page: 128 / 1489

Applications, measurement channels
R&S
®
FSVA3000/ R&S
®
FSV3000
128 User Manual 1178.8520.02 ─ 08
Selecting an application .............................................................................................. 128
└ New Channel ................................................................................................ 128
└ Replace Current Channel ............................................................................. 128
└ Duplicate Current Channel ............................................................................128
Closing an application ................................................................................................. 128
Selecting an application
To start a new or replace an existing application, select the corresponding button in the
correct tab.
Note: The measurement channels are labeled with their default name. If that name
already exists, a sequential number is added. You can change the name of the mea-
surement channel by double-tapping the name in the channel bar and entering a new
name.
For an overview of default names see
INSTrument:LIST?
on page 852.
Remote command:
INSTrument[:SELect]
on page 853
New Channel ← Selecting an application
The applications selected on this tab are started in a new measurement channel, i.e. a
new tab in the display.
Remote command:
INSTrument:CREate[:NEW]
on page 851
INSTrument[:SELect]
on page 853
Replace Current Channel ← Selecting an application
The applications selected on this tab are started in the currently displayed measure-
ment channel, replacing the current application.
Remote command:
INSTrument:CREate:REPLace
on page 851
Duplicate Current Channel ← Selecting an application
The currently active channel can be duplicated, i.e. a new channel of the same type
and with the identical measurement settings is started. The name of the new channel is
the same as the copied channel, extended by a consecutive number (e.g. "Spectrum" -
> "Spectrum 2").
Remote command:
INSTrument:CREate:DUPLicate
on page 850
Closing an application
To close an application, simply close the corresponding tab by selecting the "x" next to
the channel name.
Remote command:
INSTrument:DELete
on page 852
Selecting the applications