Chapter2. Bill Recycling Machine (BRM) Error Code Manual
© 2014
Nautilus Hyosung Inc.
All Rights Reserved.
2-167
Code
Problem Description
Troubleshooting
562G200
Failure to move stack position
of RC2 PP during Withdrawal
Ready.
1. Open the lower unit
2. Open the Mid Transport Path
3. Remove the recycle cassette (B)
4. Open the recycle cassette door (B)
5. Check cassette status to move stage
up and down
6. Check the lower edge of the
door´s right side(Key part) if you
don´t find any problem
562G400
Failure to upword moving of
PP during RC2 stack roller
retreat movement in the
Withdrawal Ready.
1. Open the lower unit
2. Open the Mid Transport Path
3. Remove the recycle cassette (B)
4. Open the recycle cassette door (B)
5. Check cassette status to move stage
up and down
6. Check the lower edge of the
door´s right side(Key part) if you
don´t find any problem
562G500
Failure of RC2 stack roller
retreat during Withdrawal
Ready.
1. Open the lower unit
2. Open the Mid Transport Path
3. Remove the recycle cassette (B)
4. Put down the Stage after open the
recycle cassette door (B)
5. Check the jam removal knob rotates
softly
562G600
Exceeds retry count limit of
detecting RC2 stack
roller´s falling back and
avoiding during Withdrawal
Ready.
1. Open the lower unit
2. Open the Mid Transport Path
3. Remove the recycle cassette (B)
4. Put down the Stage after open the
recycle cassette door (B)
5. Check the jam removal knob rotates
softly
562G700
Failure to RC2 push pressure
movement during Withdrawal
Ready.
1. Open the lower unit
2. Open the Mid Transport Path
3. Remove the recycle cassette (B)
4. Put down the Stage after open the
recycle cassette door (B)
5. Remove notes and substance using
jam removal Knob in the upper side
6. Check the GS207 sensor status if
there are No notes or substance
562G800
Failure to push pressure
movement of RC2 during
Withdrawal Ready.
1. Open the lower unit
2. Open the Mid Transport Path
3. Remove the recycle cassette (B)
4. Put down the Stage after open the
recycle cassette door (B)
5. Check the upper side of the recycle
cassette
562GA00
RC2 solenoid echo error
during Withdrawal Ready.
1. Open the lower unit
2. Open the Mid Transport Path
3. Reload the recycle cassette (B) after
removing recycle cassette
4. Replace the cassette when same
error occurs