Chapter4. Cash & Check In Module Error Code Manual
© 2014
Nautilus Hyosung Inc.
All Rights Reserved.
4-133
Code
Problem Description
Troubleshooting
I5308
[Deposit Reject]Billpress moving
path position startup fault
1. Check the inside of the Bundle(1).
2. Remove the alien materials of the
Billpress.
3. If no alien material exists in the
Billpress, check and remove the alien
materials in the Bundle Bill Press home
Position (BDS15) sensor.
4. If no alien material exists, check
whether the sensor is polluted.
I5309
[Deposit Reject]Billpress
separation position startup fault.
1. Check the inside of the Bundle(1).
2. Remove the alien materials of the
Billpress.
3. If the Billpress is up, check whether
the state is BDS18 Dark.
4. If it is not dark, move the P Roller and
check whether the state of BDS18 is
changed.
I530A
[Deposit Reject]Billpress residual
position startup fault.
1. Check the inside of the Bundle(1).
2. Remove the alien materials of the
Billpress.
3. If no alien material exists in the
Billpress, check and remove the alien
materials in the Bundle Bill Press
Up/Down (BDS16) sensor.
4. If no alien material exists, check
whether the sensor is polluted
I530B
[Deposit Reject]Billpress Reject
position startup fault.
1. Check the inside of the Bundle(1).
2. Remove the alien materials of the
Billpress.
3. If no alien material exists in the
Billpress, check and remove the alien
materials in the Bundle Bill Press part
(BDS15, BDS16) sensors.
4. If no alien material exists, check
whether the sensor is polluted
I530D
[Deposit Reject]Media remaining
at the Bundle.
1. Check the inside of the Bundle(1).
2. Remove the notes and alien materials
in the Bundle(1).
3. If no alien material exists, check
whether the sensor in the Bundle(1) is
polluted.
I530F
[Deposit Reject] Sensor fault when
preparing for separation of media.
1. Check the inside of the Bundle(1).
2. Remove the notes and alien materials
in the Bundle entry part (BDS01,
BDS02) sensors.
3. If no alien material exists, check
whether the sensor is polluted.
I5310
[Deposit Reject] When trying to
discharge the media, the number
of retries exceeds the limit.
1. Check the inside of the Bundle(1).
2. Open the separation part of SCM and
Bundle and then remove residual
banknotes and the alien materials.
3. If no alien material exists, check
whether the sensor in the Bundle(1) is
polluted.