Chapter4. Cash & Check In Module Error Code Manual
© 2014
Nautilus Hyosung Inc.
All Rights Reserved.
4-235
Code
Problem Description
Troubleshooting
I9343
[Retract]FDS03, 04 Light Timeout
(500ms) fault when separating
media.
1. SCM(2) Open
2. Remove the notes and alien materials
in the SCM Separation and Send Check
(FDS01) sensor and the Bundle.
3. If no alien material exists in the SCM
Separation and Send Check (FDS01)
sensor,
Check whether the sensor is polluted.
I9344
[Retract]FDS02, 05 Light Timeout
(88ms) fault when separating
media.
1. SCM(2) Open
2. Remove the notes and alien materials
in the SCM media length detection
sensors (FDS03, FDS04) and the
Bundle.
3. If no alien materials in the SCM media
length detection sensors (FDS03,
FDS04),
check whether the sensor is polluted.
I9345
[Retract]SCM residual fault
(Timeout 500ms) when separating
media.
1. SCM(2) Open
2. Remove the notes and alien materials
in the SCM and the Bundle.
3. Check the SCM Half Lock state.
4. If no alien material exists in the SCM,
check whether the SCM internal media
detection sensors (FDS01, FDS02,
FDS03, FDS04, FDS05) are polluted.
I9346
[Retract]AAS06 is not reached
(Light JAM) fault (timeout 600 ms)
when separating media.
1. BC(3) and SCM(2) Open
2. Remove the notes and alien materials
in the BC, SCM. and Bundle.
3. Check the BC and SCM Half Lock
state.
4. If no alien material exists in the BC
and SCM, check whether the SCM
internal media detection sensors
(FDS01, FDS02, FDS03, FDS04,
FDS05) are polluted.
I9349
[Retract]2 or more media are
separated at one time.
1. SCM(2) Open
2. Remove the notes and alien materials
in the SCM and the Bundle.
3. Check the SCM Half Lock state.
4. If no alien material exists in the SCM,
check whether the SCM internal media
detection sensors (FDS01, FDS02,
FDS03, FDS04, FDS05) are polluted.
I934A
[Retract]Bundle Sub action
Timeout
1. Execute CCIM initialization action.
2. Reboot the system when the same
error occurs after initialization.
I9359
[Retract]2 or more media are
separated at one time.
1. SCM(2) Open
2. Remove the notes and alien materials
in the SCM and the Bundle.
3. Check the SCM Half Lock state.
4. If no alien material exists in the SCM,
check whether the SCM internal media
detection sensors (FDS01, FDS02,
FDS03, FDS04, FDS05) are polluted.