Error Code Manual Chapter2. Bill Recycling Machine (BRM)
2-276
© 2014
Nautilus Hyosung Inc.
All Rights Reserved.
Code
Problem Description
Troubleshooting
596M100
Stopper Init error during
Customer Change.
1. Open the upper unit
2. Check shutter knob rotates softly in
the CSM(1)
3. Check inside of CSM
596M300
Shutter close error during
Customer Change.
1. Open the upper unit
2. Check shutter knob rotates softly in
the CSM(1)
3. Check inside of CSM
596M400
Stopper down error during
Customer Change.
1. Open the upper unit
2. Check shutter knob rotates softly in
the CSM(1)
3. Check inside of CSM
596M600
Shutter Close error initializing
stopper during Customer
Change.
1. Open the upper unit
2. Check knob rotates softly in the
CSM(1)
3. Check inside of CSM
596P100
PP withdrawal(stack) position
movement error during
Customer Change.
1. Open the upper unit
2. Check the notes and substance
inside of the CSM
3. Check PP rotates softly using knob of
the CSM(1)
596P200
PP deposit position movement
error during Customer Change.
1. Open the upper unit
2. Check the notes and substance
inside of the CSM
3. Check PP rotates softly using knob of
the CSM(1)
596P300
PP separate position
movement error during
Customer Change.
1. Open the upper unit
2. Check the notes and substance
inside of the CSM
3. Check PP rotates softly using knob of
the CSM(1)
596P400
PP lose return position
movement error during
Customer Change.
1. Open the upper unit
2. Check the notes and substance
inside of the CSM
3. Check PP rotates softly using knob of
the CSM(1)
596P500
PP notes out position
movement error during
Customer Change.
1. Open the upper unit
2. Check the notes and substance
inside of the CSM
3. Check PP rotates softly using knob of
the CSM(1)
596P900
Error of reverting notes during
Customer Change.
1. Open the upper unit
2. Check the notes and substance in the
CSM(2)
3. Check the knob rotates softly in the
CSM(2)
4. Check the knob rotates softly in the
CSM(3)
596PA00
PP preparation stop error
during Customer Change.
1. Operate to initialize BRM(Recovery)
596R100
CSM message timeout error
during Customer Change
Ready.
1. Operate to initialize BRM(Recovery)
2. Reboot the system when same error
occurred (message timeout error) after
initialization