Chapter2. Bill Recycling Machine (BRM) Error Code Manual
© 2014
Nautilus Hyosung Inc.
All Rights Reserved.
2-547
Code
Problem Description
Troubleshooting
95D1316
There were no items to cash
in.
1. check whether or not items in the
output position.
2. In spite of normal if abnormal
performance, need to analyze trace log
as being get the log.
95D1317
The BRM service is in an
exchange state.
1. Checking the AP flow cause service
is in an exchange state.
2. In spite of normal if abnormal
performance, need to analyze trace log
as being get the log.
95D1318
There is no exchange active
1. Checking the AP flow
2. In spite of normal if abnormal
performance, need to analyze trace log
as being get the log.
95D1319
Failed to close shutter when
close shutter command
1. Check the shutter status and device
status
2. In spite of normal if abnormal
performance, need to analyze trace log
as being get the log.
95D1323
Items were present at the
output position at the start of
the operation, but were
removed before the operation
was complete
1. Checking the AP flow
2. In spite of normal if abnormal
performance, need to analyze trace log
as being get the log.
95D1325
A Cash-In transaction is active. 1. Check the sequence flow AP
2. In spite of normal if abnormal
performance, need to analyze trace log
as being get the log.
95D1326
There is no Cash-In
transaction active
1. Check the sequence flow AP
2. In spite of normal if abnormal
performance, need to analyze trace log
as being get the log.
95D1328
The output position is not
empty so a cash in is not
possible.
1. Check the sequence flow AP
2. In spite of normal if abnormal
performance, need to analyze trace log
as being get the log.
95D1335
The retract area specified in
RetractArea is not supported.
1. Check the sequence flow AP
2. In spite of normal if abnormal
performance, need to analyze trace log
as being get the log.
95D1339
The hardware requires that the
cash unit is empty before
allowing changes.
1. Check the status of remaining inside
the cassette
2. In spite of normal if abnormal
performance, need to analyze trace log
as being get the log.