Chapter4. Cash & Check In Module Error Code Manual
© 2014
Nautilus Hyosung Inc.
All Rights Reserved.
4-97
Code
Problem Description
Troubleshooting
I3F19
[Entry In/Out]Error occurred by the
Return Transport Path( FDS19)
1. Remove the residual media at the
Cassette2 entry (11).
2. Execute initialization.
I3F1A
[Entry In/Out]Error occurred by the
Return Transport Path( CCS07)
1. Check residual media or alien
materials at the Cassette2(15) entry and
remove those.
I40C1
[Deposit Count/Check] Receives
undefined USB CONTROL
command.
1. Execute CCIM initialization.
2. Reboot the system when the same
error occurs after initialization.
I40C2
[Deposit Count/Check]A wrong
size is received during USB
CONTROL PIPE communication.
1. Execute CCIM initialization.
2. Reboot the system when the same
error occurs after initialization.
I40C3
[Deposit Count/Check]The size of
USB bulk data is 0 or not the
multiple of 64.
1. Execute CCIM initialization.
2. Reboot the system when the same
error occurs after initialization.
I40CF
[Deposit Count/Check]Fault of
transmitting the same seq of SP.
1. Execute CCIM initialization.
2. Reboot the system when the same
error occurs after initialization.
I40D8
[Deposit Count/Check]Narrow
media.
1. SCM(2) Open
2. Remove the notes and alien materials
in the SCM and the Bundle.
3. Check the SCM Half Lock state.
4. If no alien material exists in the SCM,
check whether the SCM internal media
detection sensors (FDS01, FDS02,
FDS03, FDS04, FDS05) are polluted.
I4103
[Deposit Count/Check]Fault of
calling a undefined command from
Cassette1.
1. Execute CCIM initialization.
2. Reboot the system when the same
error occurs after initialization.
I4104
[Deposit Count/Check]Fault of
performing a undefined process
flow from Cassette1.
1. Execute CCIM initialization.
2. Reboot the system when the same
error occurs after initialization.
I4105
[Deposit Count/Check]Cassette1
position or door open fault
1. Check the Cassette1(14) installation
state and door open state.
2. Check Cassette1 home position
(NCS01) sensor connection cable.
I4106
[Deposit Count/Check] Fault of
causing retry of moving the
Cassette1 Push Plate Bottom
position.
1. Check the jam when moving the push
plate left/right/vertically and manually.
2. Check the Cassette1 push plate
motor (NCM01) running and cable
connection.
I4107
[Deposit Count/Check]Jam at the
sensor (NCS07) detecting the
number of papers which enter into
the Cassette1.
1. Check residual media or alien
materials at the Cassette1(14) entry and
remove those.
I4108
[Deposit Count/Check] Fault of
causing retry of moving the
Cassette1 Push Plate top position.
1. Check the arrangement state of the
banknotes in the Cassette1(14).
2. Check the stack position (NCS06) and
the media entry detection (NCS09) prism
state.
3. If the same fault continuously occurs
after checking the device, replace the
Cassette1(14)