Error Code List Chapter5. Coin Dispenser
5-2
© 2014
Nautilus Hyosung Inc.
All Rights Reserved.
Code
Problem Description
Troubleshooting
R3104
Fault on opto sensor : Exit cup full
sensor
Check Exit cup status.
R3103
Fault on opto sensor : Wake up
sensor
Device Power OFF and ON
R3102
Fault on opto sensor : Cashbox
full sensor
Check Cashbox status
R3009
Slave device not responding : I2C
communication error
1. Device Power OFF and ON
2. Execute Initialize.
R3008
Slave device not responding :
Mixed currency Hopper
Check Hopper status.
R3007
Slave device not responding :
Mixed currency Coin acceptor
Check Coin acceptor status
R3006
Slave device not responding : No
hopper lowest coin
Check hopper status and Execute
Initialize.
R3005
Slave device not responding :
Coin acceptor missing
Check Coin acceptor status and Execute
Initialize.
R3004
Slave device not responding :
Hopper ID mis match
Check Hopper Status.
R3003
Slave device not responding : No
Hoppers fitted
Check Hoppers status and Execute
Initialize.
R3002
Slave device not responding :
Hopper tray missing
Check Hopper tray status and Execute
Initialize.
R3001
Slave device not responding :
Cashbox missing
Check Cashbox status and Execute
Initialize.
R2800
RAM test fail
1. Device Power OFF and ON
2. Execute Initialize.
R2104
Supply voltage outside operation
limits : Coin ac5V rail
1. Device Power OFF and ON
2. Execute Initialize.
R2103
Supply voltage outside operation
limits : Coin ac24V rail
1. Device Power OFF and ON
2. Execute Initialize.
R2102
Supply voltage outside operation
limits : Cont5V rail
1. Device Power OFF and ON
2. Execute Initialize.
R2101
Supply voltage outside operation
limits : Cont24V rail
1. Device Power OFF and ON
2. Execute Initialize.
R2000
Internal comms bad : parallel
interface to validator
1. Device Power OFF and ON
2. Execute Initialize.
R1B00
Level sensor error
Check Level sensor and Execute
Initialize.
R1A00
Payout sensor fault
Check Payout sensor status and
Execute Initialize.
R170F
Payout motor fault : Coin motor
excessive jam jogs
Check Coin motor status and Execute
Initialize.
R170E
Payout motor fault : Coin motor
coin jam
Check Coin motor status and Execute
Initialize.
R170D
Payout motor fault : Coin motor
park opto missing
Check Coin motor park opto status and
Execute Initialize.
R170C
Payout motor fault : Coin motor -
diameter opto missing
Check Coin motor diameter opto and
Execute Initialize.
R170B
Payout motor fault : Coin motor
tachs
Payout motor
오류
: Coin motor tachs
Execute Initialize.
R170A
Payout motor fault : Coin motor -
fault
Check Coin motor status and Execute
Initialize.