Chapter4. Cash & Check In Module Error Code Manual
© 2014
Nautilus Hyosung Inc.
All Rights Reserved.
4-135
Code
Problem Description
Troubleshooting
I5507
[Deposit Reject]Residual media at
the Escrow entry part (ESS03,
ESS04) when preparing for media
output
1. Open the Escrow Part(12).
2. Remove the media at the Escrow
Drum residual check (ESS03) and
output check (ESS04) sensor part and
the pollution.
3. Execute CCIM initialization.
I5508
[Deposit Reject]Escrow Tape
Start(ESS06) detection fault when
preparing for media output.
1. Open the Escrow part (12) and
remove the ESS06 media and pollution.
2. Rotate the Escrow Knob in clock-wise
three times.
3. Execute CCIM initialization.
I5509
[Deposit Reject]Residual media at
the Escrow entry part (ESS03,
ESS04) when reset the Escrow
mode
1. Open the Escrow Part(12).
2. Remove the media at the Escrow
Drum residual check (ESS03) and
output check (ESS04) sensor part and
the pollution.
3. Execute CCIM initialization.
I550A
[Deposit Reject]Residual media at
the Escrow (ESS01, ESS02,
ESS03, ESS04) when reset the
Escrow mode
1. Open the Escrow Part(12).
2. Remove the media residual at the
Escrow (ESS01, ESS02, ESS03,
ESS04) and the pollution.
3. Execute CCIM initialization.
I550B
[Deposit Reject] Residual media at
the Escrow output check sensor
before the Trigger sensor detects
deflecting when winding the
media.
1. Open the Escrow Part(12).
2. Remove the media at the Escrow
entry (FDS15) and output check
(ESS04) sensor part and the pollution.
3. Execute CCIM initialization.
I550C
[Deposit Reject]Escrow Tape End
(ESS07) detection fault when
executing media winding.
1. Open the Escrow part (12) and
remove the ESS07 media and pollution.
2. Rotate the Escrow Knob in
counterclock-wise three times.
3. Execute CCIM initialization.
I550D
[Deposit Reject]Escrow Full
(ESS05) detection fault when
executing media winding.
1. Open the Escrow part (12) and
remove the ESS05 media and pollution.
2. Rotate the Escrow Knob in
counterclock-wise three times.
3. Execute CCIM initialization.
I550E
[Deposit Reject]Light jam at the
Escrow output check sensor
(ESS04) when executing media
winding.
1. Open the Escrow Part(12).
2. Remove the media between the
Escrow entry (FDS15) and output check
(ESS04) sensor part and the pollution.
3. Execute CCIM initialization.
I550F
[Deposit Reject]Dark jam at the
Escrow output check sensor
(ESS04) when executing media
winding.
1. Open the Escrow Part(12).
2. Remove the ESS04 media and
pollution.
3. Execute CCIM initialization.
I5510
[Deposit Reject]Fault of
performing a undefined process
flow from Escrow.
1. Execute CCIM initialization.
2. Reboot the system when the same
error occurs after initialization.
I5511
[Deposit Reject]Jam between the
Escrow entry sensor (ESS04) and
(FDS15) while storing the media.
1. Open the Escrow Part(12).
2. Remove the media at the Escrow
entry (FDS15) and output check
(ESS04) sensor part and the pollution.
3. Execute CCIM initialization.