Error Code Manual Chapter2. Bill Recycling Machine (BRM)
2-280
© 2014
Nautilus Hyosung Inc.
All Rights Reserved.
Code
Problem Description
Troubleshooting
598HF20
Error to load recognition DB
#10 during Customer Change.
1.Download DB again after delecting all
recognition DB
2. Operate to initialize BRM(Recovery)
598HG01
Error of mode set up during
BCU Mode Command in the
Customer Change.
1. Operate to initialize BRM(Recovery)
2. Reboot the system when same error
occurred after initialization
598HG02
Error of the recognition level
set up during BCU mode
command in the Customer
Change.
1. Operate to initialize BRM(Recovery)
2. Reboot the system when same error
occurred after initialization
598HG03
Error of the transaction ready
set up during BCU ready
command in the Customer
Change.
1. Operate to initialize BRM(Recovery)
2. Reboot the system when same error
occurred after initialization
598HG04
Error of mode set up during
BCU ready command in the
Customer Change.
1. Operate to initialize BRM(Recovery)
2. Reboot the system when same error
occurred after initialization
598HG05
Error of the recognition level
set up during BCU ready
command in the Customer
Change.
1. Operate to initialize BRM(Recovery)
2. Reboot the system when same error
occurred after initialization
598HG06
Error of the BC insert direction
during BCU ready command
in the Customer Change.
1. Operate to initialize BRM(Recovery)
2. Reboot the system when same error
occurred after initialization
598HG07
Error of BCU undefined
command reception during
Customer Change.
1. Operate to initialize BRM(Recovery)
2. Reboot the system when same error
occurred after initialization
598HG08
Error of available support
country numbers set up during
receiving BCU data write
command in the Customer
Change .
1. Check the country
2. Operate to initialize BRM(Recovery)
3. Reboot the system when same error
occurred after initialization
598HG09
Error of country-code set up
during receiving BCU data
write command in the
Customer Change .
1. Check the country
2. Operate to initialize BRM(Recovery)
3. Reboot the system when same error
occurred after initialization
598HG10
Error of no recognition DB for
the country during receiving
BCU data write command in
the Customer Change .
1. Check the country
2. Download DB again after delecting all
recognition DB
3. Operate to initialize BRM(Recovery)
4. Reboot the system when same error
occurred after initialization
598HG11
Error of no country code set up
during receiving BCU ready
command in the Customer
Change .
1. Check the country
2. Operate to initialize BRM(Recovery)
3. Reboot the system when same error
occurred after initialization
598HG12
BC spec differs from data write
command paramter during
Customer Change .
1. Check the BCU specifications.
2. Operate to initialize BRM(Recovery)
3. Reboot the system when same error
occurred after initializatio