Chapter2. Bill Recycling Machine (BRM) Error Code Manual
© 2014
Nautilus Hyosung Inc.
All Rights Reserved.
2-175
Code
Problem Description
Troubleshooting
564G200
Failure to move stack position
of RC4 PP during Withdrawal
Ready.
1. Open the lower unit
2. Open the Mid Transport Path
3. Remove the recycle cassette (D)
4. Open the recycle cassette door (D)
5. Check cassette status to move stage
up and down
6. Check the lower edge of the
door´s right side(Key part) if you
don´t find any problem
564G400
Failure to upword moving of
PP during RC4 stack roller
retreat movement in the
Withdrawal Ready.
1. Open the lower unit
2. Open the Mid Transport Path
3. Remove the recycle cassette (D)
4. Open the recycle cassette door (D)
5. Check cassette status to move stage
up and down
6. Check the lower edge of the
door´s right side(Key part) if you
don´t find any problem
564G500
Failure of RC4 stack roller
retreat during Withdrawal
Ready.
1. Open the lower unit
2. Open the Mid Transport Path
3. Remove the recycle cassette (D)
4. Put down the Stage after open the
recycle cassette door (D)
5. Check the jam removal knob rotates
softly
564G600
Exceeds retry count limit of
detecting RC4 stack
roller´s falling back and
avoiding during Withdrawal
Ready.
1. Open the lower unit
2. Open the Mid Transport Path
3. Remove the recycle cassette (D)
4. Put down the Stage after open the
recycle cassette door (D)
5. Check the jam removal knob rotates
softly
564G700
Failure to move RC4 feed
roller to home position during
Withdrawal Ready.
1. Open the lower unit
2. Open the Mid Transport Path
3. Remove the recycle cassette (D)
4. Put down the Stage after open the
recycle cassette door (D)
5. Remove notes and substance using
jam removal Knob in the upper side
6. Check the GS407 sensor status if
there are No notes or substance
564G800
Failure to RC4 push pressure
movement during Withdrawal
Ready.
1. Open the lower unit
2. Open the Mid Transport Path
3. Remove the recycle cassette (D)
4. Put down the Stage after open the
recycle cassette door (D)
5. Check the upper side of the recycle
cassette
564GA00
RC4 solenoid echo error
during Withdrawal Ready.
1. Open the lower unit
2. Open the Mid Transport Path
3. Reload the recycle cassette (D) after
removing recycle cassette
4. Replace the cassette when same
error occurs