Error Code Manual Chapter2. Bill Recycling Machine (BRM)
2-318
© 2014
Nautilus Hyosung Inc.
All Rights Reserved.
Code
Problem Description
Troubleshooting
5AA2K00
Status of remaining notes on
the Return Path(GS703)
before the operation during
Retract CSM.
1. Open the upper unit
2. Open the TE(Temporary Escrow) (12)
3. Rotate a knob of TE(12)
4. Remove notes and substance in the
Rear Transport Path(11)
5AA2M00
Status of remaining notes on
the Return Path(GS031)
before the operation during
Retract CSM.
1. Open the lower unit
2. Rotate the knob of the Mid Transport
Path
3. Remove notes and substance in the
Mid Transport Path(13)
4. Check whether the sensor is
contaminated or not if there are No
notes or substance
5AA2N00
Status of remaining notes on
the Return Path(GS032)
before the operation during
Retract CSM.
1. Open the lower unit
2. Rotate the knob of the Mid Transport
Path
3. Remove notes and substance in the
Mid Transport Path(13)
4. Check whether the sensor is
contaminated or not if there are No
notes or substance
5AA2P00
Status of remaining notes on
the Return Path(GS033)
before the operation during
Retract CSM.
1. Open the lower unit
2. Rotate the knob of the Mid Transport
Path
3. Remove notes and substance in the
Mid Transport Path(13)
4. Check whether the sensor is
contaminated or not if there are No
notes or substance
5AA2Q00
Status of remaining notes on
the Return Path(GS034)
before the operation during
Retract CSM.
1. Open the lower unit
2. Rotate the knob of the Mid Transport
Path
3. Remove notes and substance in the
Mid Transport Path(13)
4. Check whether the sensor is
contaminated or not if there are No
notes or substance
5AA2W00
Status of remaining notes on
the Return Path(GS802)
before the operation during
Retract CSM.
1. Open the upper unit
2. Open the customer service module
(CSM)
3. Open the BC(5)
4. Remove notes and substance in the
BC(5)
5. Check whether the sensor is
contaminated or not if there are No
notes or substance
5AAA100
Status of UTC removal before
the operation during Retract
CSM.
1. Open the upper unit
2. Check removal of the cassette not
received(9)
5AAA200
Status of TE open before the
operation during Retract CSM.
1. Open the upper Unit
2. Check open/close of TE(12)
5AAA300
Status of BMU inter lock
detachment before the
operation during Retract CSM.
1. Check Load/Removal of the upper
unit
2. Replace a cherry switch when error
occures