Error Code List Chapter4. Cash & Check In Module
4-264
© 2014
Nautilus Hyosung Inc.
All Rights Reserved.
Code
Problem Description
Troubleshooting
IB804
[AutoDimming]Internal Error while
the main task is operating.
1. Execute CCIM initialization.
2. Reboot the system when the same
error occurs after initialization.
ID0C1
[EP Download] Receives
undefined USB CONTROL
command.
1. Execute CCIM initialization.
2. Reboot the system when the same
error occurs after initialization.
ID0C2
[EP Download]A wrong size is
received during USB CONTROL
PIPE communication.
1. Execute CCIM initialization.
2. Reboot the system when the same
error occurs after initialization.
ID0C3
[EP Download]The size of USB
bulk data is 0 or not the multiple of
64.
1. Execute CCIM initialization.
2. Reboot the system when the same
error occurs after initialization.
ID0CF
[EP Download]Fault of
transmitting the same seq of SP.
1. Execute CCIM initialization.
2. Reboot the system when the same
error occurs after initialization.
ID801
[EP Download] A command was
not executed due to a fault which
has occurred while preparing the
main task.
1. Execute CCIM initialization.
2. Reboot the system when the same
error occurs after initialization.
ID802
[EP Download]Main Task force
shut down.
1. Execute CCIM initialization.
2. Reboot the system when the same
error occurs after initialization.
ID803
[EP Download] Receives a
command which has not been
defined in the main task.
1. Execute CCIM initialization.
2. Reboot the system when the same
error occurs after initialization.
ID804
[EP Download]Internal Error while
the main task is operating.
1. Execute CCIM initialization.
2. Reboot the system when the same
error occurs after initialization.
IE0C1
[Settings] Receives undefined
USB CONTROL command.
1. Execute CCIM initialization.
2. Reboot the system when the same
error occurs after initialization.
IE0C2
[Settings]A wrong size is received
during USB CONTROL PIPE
communication.
1. Execute CCIM initialization.
2. Reboot the system when the same
error occurs after initialization.
IE0C3
[Settings]The size of USB bulk
data is 0 or not the multiple of 64.
1. Execute CCIM initialization.
2. Reboot the system when the same
error occurs after initialization.
IE0CF
[Settings]Fault of transmitting the
same seq of SP.
1. Execute CCIM initialization.
2. Reboot the system when the same
error occurs after initialization.
IE801
[Settings] A command was not
executed due to a fault which has
occurred while preparing the main
task.
1. Execute CCIM initialization.
2. Reboot the system when the same
error occurs after initialization.
IE802
[Settings]Main Task force shut
down.
1. Execute CCIM initialization.
2. Reboot the system when the same
error occurs after initialization.
IE803
[Settings] Receives a command
which has not been defined in the
main task.
1. Execute CCIM initialization.
2. Reboot the system when the same
error occurs after initialization.
IE804
[Settings]Internal Error while the
main task is operating.
1. Execute CCIM initialization.
2. Reboot the system when the same
error occurs after initialization.
IE81C
[Settings]BC version read retry
fault when performing version
read.
1. Check the cable connecting between
Main and BC (Connector CN37).