Nautilus Hyosung MX8800, Руководство пользователя, Страница: 795 / 827

Error Code List Chapter4. Cash & Check In Module
4-242 © 2014 Nautilus Hyosung Inc. All Rights Reserved.
Code Problem Description Troubleshooting
I9607 [Retract] Before moving the media
at the Reject to the Bundle, the
billpress of the Bundle part is not
moved to the Reject position. 1. Check the inside of the Bundle(1).
2. Remove the alien materials of the
Billpress.
3. If no alien material exists in the
Billpress,
Check and remove the alien materials
in the Bundle Bill Press part (BDS15,
BDS16) sensors.
4. If no alien material exists, check
whether the sensor is polluted.
I9608 [Retract]When media are piled at
the Reject part, jam occurs at the
Reject output check sensor
(RJS08). 1. Remove the notes and alien materials
in the Reject output check sensor
(RJS08).
2. If no alien material exists, check
whether the sensor is polluted.
I9609 [Retract]Alien media have
sequentially entered to the Reject
part. 1. Reject Door(9) Open
2. Remove the notes and alien materials
in the Reject.
3. If no alien material exists, check
whether the Reject output check sensor
(RJS08) is polluted.
I960A [Retract]When media abnormally
access and are piled at the Reject
part, the residual media exist at
the Reject part (RJS10 Dark). 1. Remove the notes and alien materials
in the Reject output media residual
sensor (RJS10).
2. If no alien material exists, check
whether the sensor is polluted.
I960B [Retract]When media abnormally
access and are piled at the Reject
part, the residual media exist at
the Reject part (RJS10 Dark). 1. Remove the notes and alien materials
in the Reject output check sensor
(RJS08).
2. If no alien material exists, check
whether the sensor is polluted.
I960C [Retract]Fault of performing a
undefined process flow from
Reject. 1. Execute CCIM initialization.
2. Reboot the system when the same
error occurs after initialization.
I96F1 [Retract]Reject Task force shut
down. 1. Execute CCIM initialization.
2. Reboot the system when the same
error occurs after initialization.
I9801 [Retract] A command was not
executed due to a fault which has
occurred while preparing the main
task. 1. Execute CCIM initialization.
2. Reboot the system when the same
error occurs after initialization.
I9802 [Retract]Main Task force shut
down. 1. Execute CCIM initialization.
2. Reboot the system when the same
error occurs after initialization.
I9803 [Retract] Receives a command
which has not been defined in the
main task. 1. Execute CCIM initialization.
2. Reboot the system when the same
error occurs after initialization.
I9804 [Retract]Internal Error while the
main task is operating. 1. Execute CCIM initialization.
2. Reboot the system when the same
error occurs after initialization.
I9805 [Retract]Bundle part operation
timeout 1. Remove the residual media at the
Bundle part (1).
2. Execute initialization.
I9806 [Retract]Reject part residual fault 1. Open the door of Reject(9) part and
remove the residual media.
2. Execute initialization.