Error Code Manual Chapter2. Bill Recycling Machine (BRM)
2-476
© 2014
Nautilus Hyosung Inc.
All Rights Reserved.
Code
Problem Description
Troubleshooting
5K7G200
Fail to drive the direction of
motor Separate during
Withdrawal Reject.
1. Open the upper unit
2. Confirm to Rotate a knob of TE(12)
softly
5K7G300
Motor Stop error during
Withdrawal Reject.
1. Open the upper unit
2. Confirm to Rotate a knob of TE(12)
softly
5K7G400
No detect the front end of tape
during Withdrawal Reject.
1.Open upper Unit
2. Check the notes remain in the TE(12)
3. Check the color of tape´s front
end is black in the TE(12)
4. Remove notes remain in the TE
5K7G500
Detect the front end of tape
during Withdrawal Reject.
1.Open upper Unit
2. Check the notes remain in the TE(12)
3. Check the color of tape´s front
end is black in the TE(12)
4. Remove notes remain in the TE
5K7G600
No detect the rear end of tape
during Withdrawal Reject.
1.Open upper Unit
2. Check the notes remain in the TE(12)
3. Cheeck whether black tape is wrap
with a drum in the TE(12)
4. Remove notes remain in the TE
5K7G700
Detect the rear end of tape
during Withdrawal Reject.
1.Open upper Unit
2. Check the notes remain in the TE(12)
3. Cheeck whether black tape is wrap
with a drum in the TE(12)
4. Remove notes remain in the TE
5K7J100
TE drum full during Withdrawal
Reject.
1. Open the upper unit
2. Check the notes remain in the TE(12)
3. Remove notes remain in the TE
5K7J200
TE drum empty during
Withdrawal Reject.
1. Open the upper unit
2. Check the notes remain in the TE(12)
3. Check the GS701/GS702/GS709
Sensor
4. Remove notes remain in the TE
5K7J300
Normal receipt End is not
possible during Withdrawal
Reject.
1. Operate to initialize BRM(Recovery)
5K7R100
TE message timeout error
during the operation ready to
Withdrawal Reject.
1. Operate to initialize BRM(Recovery)
2. Reboot the system when same error
occurred (message timeout error) after
initialization
5K7R200
TE message timeout error
during the operation of
transaction to Withdrawal
Reject.
1. Operate to initialize BRM(Recovery)
2. Reboot the system when same error
occurred (message timeout error) after
initialization
5K7R300
TE message timeout error
during the error treatment to
Withdrawal Reject.
1. Operate to initialize BRM(Recovery)
2. Reboot the system when same error
occurred (message timeout error) after
initialization
5K8HA01
Error GS801A during
Withdrawal Reject.
1. Check GS801A
2. Operate to initialize BRM(Recovery)
5K8HA02
Error GS801B during
Withdrawal Reject.
1. Check GS801B
2. Operate to initialize BRM(Recovery)
5K8HA03
Error GS801A, GS801B during
Withdrawal Reject.
1. Check GS801A, GS801B
2. Operate to initialize BRM(Recovery)