Nautilus Hyosung MX8800, Руководство пользователя, Страница: 687 / 827

Error Code List Chapter4. Cash & Check In Module
4-134 © 2014 Nautilus Hyosung Inc. All Rights Reserved.
Code Problem Description Troubleshooting
I5312 [Deposit Reject] Fault of receiving
media returned due to low-speed
moving path up. 1. Open the door at the Bundle side and
remove the residual media.
2. Check and remove the alien materials
in the Bundle low-speed wheel position
control (BDS14) sensor.
3. If no alien material exists, check
whether the sensor is polluted.
4. Initialize the device.
I5315 [Deposit Reject]Fault of calling a
undefined command from Bundle. 1. Execute CCIM initialization.
2. Reboot the system when the same
error occurs after initialization.
I5318 [Deposit Reject]Fault of
performing a undefined process
flow from Bundle. 1. Execute CCIM initialization.
2. Reboot the system when the same
error occurs after initialization.
I5319 [Deposit Reject]BDS06 Dark
Timeout when performing low-
speed moving path down 1. Execute CCIM initialization.
2. Check whether the sensor (BDS06)
detecting the Bundle low-speed moving
path media is polluted when the same
error occurs after initialization.
I53F0 [Deposit Reject]Bundle Task Skip. 1. Execute CCIM initialization.
2. Reboot the system when the same
error occurs after initialization.
I53FF [Deposit Reject]Bundle task force
shutdown. 1. Execute CCIM initialization.
2. Reboot the system when the same
error occurs after initialization.
I5501 [Deposit Reject]Fault of calling a
undefined command from Escrow. 1. Execute CCIM initialization.
2. Reboot the system when the same
error occurs after initialization.
I5502 [Deposit Reject]Fault of
performing a undefined process
flow from Escrow. 1. Execute CCIM initialization.
2. Reboot the system when the same
error occurs after initialization.
I5503 [Deposit Reject]Escrow entry
(ESS03, ESS04) residual fault
when preparing for media winding
when Escrow has the media 1. Open the Escrow Part(12).
2. Remove the media at the Escrow
Drum residual check (ESS03) and
output check (ESS04) sensor part and
the pollution.
3. Execute CCIM initialization.
I5504 [Deposit Reject]Tape End
(ESS07) detection fault when
preparing for media winding when
Escrow has media. 1. Open the Escrow Part(12).
2. Manually remove media from Escrow.
3. Initialize.
I5505 [Deposit Reject]Escrow entry
(ESS03, ESS04) residual fault
when preparing for media winding
when Escrow has no media 1. Open the Escrow Part(12).
2. Remove the media at the Escrow
Drum residual check (ESS03) and
output check (ESS04) sensor part and
the pollution.
3. Execute CCIM initialization.
I5506 [Deposit Reject]Escrow internal
(ESS01,02,03,04) residual fault
when preparing for media winding
when Escrow has no media 1. Open the Escrow Part(12).
2. Remove the media residual at the
Escrow (ESS01, ESS02, ESS03,
ESS04) and the pollution.
3. Execute CCIM initialization.