Nautilus Hyosung MX8800, Руководство пользователя, Страница: 740 / 827

Chapter4. Cash & Check In Module Error Code Manual
© 2014 Nautilus Hyosung Inc. All Rights Reserved.
4-187
Code Problem Description Troubleshooting
I7209 [Deposit OK] Fault of exceeding
the retries when the Cassette2
Clamp failed to move to the
position (CCS08 Light). 1. Check the Cassette2 media guide
motor (CCM02) running and cable
connection.
2. If the same fault continuously occurs
after checking the device, replace the
Cassette2(15).
I720A [Deposit OK] Fault that the home
position is not detected even when
the Cassette2 Clamp is running at
the home position (CCS08 Light). 1. Check the Cassette2 media guide
motor (CCM02) running and cable
connection.
2. If the same fault continuously occurs
after checking the device, replace the
Cassette2(15)
I720B [Deposit OK] Failure to detect the
bottom (CCS05) when the
Cassette2 Push Plate Stack
moves. 1. Check the arrangement state of
banknotes in the Cassette.
2. Check the Stack position sensor
(CCS06) lever operation state.
3. If the Push Plate is not at the bottom,
check the alien materials at the
Cassette2 Bottom sensor(CCS05).
I731E [Deposit OK]BDS06 Dark fault
after initializing the Bundle 1. Execute CCIM initialization.
2. Check whether the sensor (BDS06)
detecting the Bundle low-speed moving
path media is polluted when the same
error occurs after initialization.
I731F [Deposit OK]BDS17 Dark fault
after initializing the Bundle. 1. Execute CCIM initialization.
2. Check whether the Bundle DC Motor
Encoder (BDS17) sensor is polluted
when the same error occurs after
initialization.
I7501 [Deposit OK]Fault of calling a
undefined command from Escrow. 1. Execute CCIM initialization.
2. Reboot the system when the same
error occurs after initialization.
I7502 [Deposit OK]Fault of performing a
undefined process flow from
Escrow. 1. Execute CCIM initialization.
2. Reboot the system when the same
error occurs after initialization.
I7503 [Deposit OK]Escrow entry
(ESS03, ESS04) residual fault
when preparing for media winding
when Escrow has the media 1. Open the Escrow Part(12).
2. Remove the media at the Escrow
Drum residual check (ESS03) and
output check (ESS04) sensor part and
the pollution.
3. Execute CCIM initialization.
I7504 [Deposit OK]Tape End when
preparing for media winding when
Escrow has media
(ESS07) Detection fault. 1. Open the Escrow Part(12).
2. Manually remove media from Escrow.
3. Initialize.
I7505 [Deposit OK]Escrow entry
(ESS03, ESS04) residual fault
when preparing for media winding
when Escrow has no media 1. Open the Escrow Part(12).
2. Remove the media at the Escrow
Drum residual check (ESS03) and
output check (ESS04) sensor part and
the pollution.
3. Execute CCIM initialization.