Nautilus Hyosung MX8800, Руководство пользователя, Страница: 744 / 827

Chapter4. Cash & Check In Module Error Code Manual
© 2014 Nautilus Hyosung Inc. All Rights Reserved.
4-191
Code Problem Description Troubleshooting
I7529 [Deposit OK]When detecting the
Escrow Drum hole, the drum hole
is not dark-detected (ESS01 or
ESS02 Dark) and if 150 ms is
exceeded, a fault occurs. 1. Open the Escrow Part(12).
2. Remove the ESS01 and ESS02
media and pollution.
3. Execute CCIM initialization.
I752A [Deposit OK]When detecting the
Escrow Drum hole, the drum hole
is not light-detected (ESS01,
ESS02) after detecting the drum
hole dark and if 350 ms is
exceeded, a fault occurs. 1. Open the Escrow Part(12).
2. Remove the ESS01 and ESS02
media and pollution.
3. Execute CCIM initialization.
I752B [Deposit OK] When both of
Escrow Tape Start (ESS06)
sensor and the End sensor are
detected simultaneously. 1. Open the Escrow Part(12).
2. Remove the ESS06 and ESS07
media and pollution.
3. Execute CCIM initialization.
I752C [Deposit OK]When checking the
residual in the Escrow and tape
end is detected so that retry is
made, the number of retries
exceeds the limit. 1. Open the Escrow Part(12).
2. Remove the ESS07 media and
pollution.
3. Execute CCIM initialization.
I752D [Deposit OK]After checking the
residual in the Escrow, tape start
is not detected for 100 mm and
14s is exceeded. 1. Open the Escrow Part(12).
2. Remove the ESS01 and ESS02
media and pollution.
3. Execute CCIM initialization.
I752E [Deposit OK]The residual media
before the Escrow entry or Drum
is detected (ESS04, ESS03) while
winding the media. 1. Open the Escrow Part(12).
2. Remove the media at the Escrow
Drum residual check (ESS03) and
output check (ESS04) sensor part and
the pollution.
3. Execute CCIM initialization.
I752F [Deposit OK]The residual media
before the Escrow entry or Drum
is detected (ESS04, ESS03) while
winding the media. 1. Open the Escrow Part(12).
2. Remove the media at the Escrow
Drum residual check (ESS03) and
output check (ESS04) sensor part and
the pollution.
3. Execute CCIM initialization.
I7530 [Deposit OK]The residual media
before the Escrow entry or Drum
is detected (ESS04, ESS03) while
discharging the media. 1. Open the Escrow Part(12).
2. Remove the media at the Escrow
Drum residual check (ESS03) and
output check (ESS04) sensor part and
the pollution.
3. Execute CCIM initialization.
I7531 [Deposit OK]The residual media
before the Escrow entry or Drum
is detected (ESS04, ESS03) while
discharging the media. 1. Open the Escrow Part(12).
2. Remove the media at the Escrow
Drum residual check (ESS03) and
output check (ESS04) sensor part and
the pollution.
3. Execute CCIM initialization.
I7580 [Deposit OK]Receives a command
which says to unwind the roll of
the Escrow until exceeding the
number of winding media. 1. Check Sensor (Escrow entry (FDS15)
and output check (EES04) sensor)
2. Execute initialization.