Error Code List Chapter4. Cash & Check In Module
4-240
© 2014
Nautilus Hyosung Inc.
All Rights Reserved.
Code
Problem Description
Troubleshooting
I9526
[Retract]Residual media at the
Escrow entry (ESS03, ESS04)
when detecting tape start
(2093Step) by unwinding the
Escrow Drum
1. Open the Escrow Part(12).
2. Remove the media at the Escrow
Drum residual check (ESS03) and
output check (ESS04) sensor part and
the pollution.
3. Execute CCIM initialization.
I9527
[Retract]Residual media at the
Escrow entry part (ESS03,
ESS04) when setting the tape end
position by winding the Escrow
Drum
1. Open the Escrow Part(12).
2. Remove the media at the Escrow
Drum residual check (ESS03) and
output check (ESS04) sensor part and
the pollution.
3. Execute CCIM initialization.
I9528
[Retract]When winding the Escrow
Drum and setting the tape end,
the tape end is not dark-detected
for 50 ms continuously and if 45s
is exceeded, a fault occurs.
1. Open the Escrow Part(12).
2. Remove the ESS07 media and
pollution.
3. Check Motor (ESM01)
4. Execute CCIM initialization.
I9529
[Retract]When detecting the
Escrow Drum hole, the drum hole
is not dark-detected (ESS01 or
ESS02 Dark) and if 150 ms is
exceeded, a fault occurs.
1. Open the Escrow Part(12).
2. Remove the ESS01 and ESS02
media and pollution.
3. Execute CCIM initialization.
I952A
[Retract]When detecting the
Escrow Drum hole, the drum hole
is not light-detected (ESS01,
ESS02) after detecting the drum
hole dark and if 350 ms is
exceeded, a fault occurs.
1. Open the Escrow Part(12).
2. Remove the ESS01 and ESS02
media and pollution.
3. Execute CCIM initialization.
I952B
[Retract] When both of Escrow
Tape Start (ESS06) sensor and
the End sensor are detected
simultaneously.
1. Open the Escrow Part(12).
2. Remove the ESS06 and ESS07
media and pollution.
3. Execute CCIM initialization.
I952C
[Retract]When checking the
remaining in the Escrow and tape
end is detected so that retry is
made, the number of retries
exceeds the limit.
1. Open the Escrow Part(12).
2. Remove the ESS07 media and
pollution.
3. Execute CCIM initialization.
I952D
[Retract]After checking the
remaining in the Escrow, tape
start is not detected for 100 mm
and 14s is exceeded.
1. Open the Escrow Part(12).
2. Remove the ESS01 and ESS02
media and pollution.
3. Execute CCIM initialization.
I952E
[Retract]The remaining before the
Escrow entry or Drum is detected
(ESS04, ESS03) while winding the
media.
1. Open the Escrow Part(12).
2. Remove the media at the Escrow
Drum residual check (ESS03) and
output check (ESS04) sensor part and
the pollution.
3. Execute CCIM initialization.
I952F
[Retract]The remaining before the
Escrow entry or Drum is detected
(ESS04, ESS03) while winding the
media.
1. Open the Escrow Part(12).
2. Remove the media at the Escrow
Drum residual check (ESS03) and
output check (ESS04) sensor part and
the pollution.
3. Execute CCIM initialization.