Error Code List Chapter4. Cash & Check In Module
4-222
© 2014
Nautilus Hyosung Inc.
All Rights Reserved.
Code
Problem Description
Troubleshooting
I8C08
[Deposit End]JBCS02 Light
Timeout(500ms) fault when
separating media.
1. SCM(2) Open
2. Remove the notes and alien materials
in the SCM and the Bundle.
3. Check the SCM Half Lock state.
4. If no alien material exists in the SCM,
check whether the SCM internal media
detection sensors (FDS01, FDS02,
FDS03, FDS04, FDS05) are polluted.
I8C09
[Deposit End]JBCS01,BCS02
Light Timeout(500ms) fault when
separating media.
1. SCM(2) Open
2. Remove the notes and alien materials
in the SCM and the Bundle.
3. Check the SCM Half Lock state.
4. If no alien material exists in the SCM,
check whether the SCM internal media
detection sensors (FDS01, FDS02,
FDS03, FDS04, FDS05) are polluted.
I8C0A
[Deposit End]JFDS15 Light
Timeout fault
1. Open the third moving path (8) and
then remove the residual media and
alien materials.
2. Check the 3Way-Gate2 operation
state (FDM07)
I8C0B
[Deposit End]JAAS06 is not
reached (Light JAM) fault when
separating media.
1. BC(3) and SCM(2) Open
2. Remove the notes and alien materials
in the BC, SCM. and Bundle.
3. Check the BC and SCM Half Lock
state.
4. If no alien material exists in the BC
and SCM, check whether the SCM
internal media detection sensors
(FDS01, FDS02, FDS03, FDS04,
FDS05) are polluted.
I8C0C
[Deposit End]JAAS05 Light
Timeout fault
1. Alignment(4) Open
2. Alignment(4) part residual media
I8C0D
[Deposit End]JAAS03 Light
Timeout fault
1. Alignment(4) Open
2. Alignment(4) part residual media
I8C0E
[Deposit End]JRCS01 Light
Timeout fault
1. Alignment(4) Open
2. Alignment(4) part residual media
I8C0F
[Deposit End]JFDS07 Light
Timeout fault
1. Remove the internal media and alien
materials in the Recognition(5).
2. If the same fault continuously occurs
after checking the device, replace the
Recognition(5) Module.
I8C10
[Deposit End]JFDS23 Light
Timeout fault
1. Remove the internal media and alien
materials in the Recognition(5).
2. If the same fault continuously occurs
after checking the device, replace the
Recognition(5) Module.
I8C11
[Deposit End]JFDS09 Light
Timeout fault
1. Open the BM2(7) Upper Guide and
remove the residual media and alien
material.
2. Open the BM3 moving path to remove
the residual media.
I8C12
[Deposit End]JFDS12 Light
Timeout fault
1. Open the BM2(7) and then remove
the residual media and alien materials.
2. Check the 3Way-Gate1 operation
state (FDM06)