Error Code List Chapter4. Cash & Check In Module
4-140
© 2014
Nautilus Hyosung Inc.
All Rights Reserved.
Code
Problem Description
Troubleshooting
I560B
[Deposit Reject]When media
abnormally access and are piled
at the Reject part, the residual
media exist at the Reject part
(RJS08 Dark).
1. Remove the notes and alien materials
in the Reject output check sensor
(RJS08).
2. If no alien material exists, check
whether the sensor is polluted.
I560C
[Deposit Reject]Fault of
performing a undefined process
flow from Reject.
1. Execute CCIM initialization.
2. Reboot the system when the same
error occurs after initialization.
I56F1
[Deposit Reject]Reject task force
shutdown.
1. Execute CCIM initialization.
2. Reboot the system when the same
error occurs after initialization.
I5801
[Deposit Reject] A command was
not executed due to a fault which
has occurred while preparing the
main task.
1. Execute CCIM initialization.
2. Reboot the system when the same
error occurs after initialization.
I5802
[Deposit Reject]Main task force
shutdown.
1. Execute CCIM initialization.
2. Reboot the system when the same
error occurs after initialization.
I5803
[Deposit Reject]Receives a
command which has not been
defined in the main task.
1. Execute CCIM initialization.
2. Reboot the system when the same
error occurs after initialization.
I5804
[Deposit Reject]Internal Error
while the main task is operating.
1. Execute CCIM initialization.
2. Reboot the system when the same
error occurs after initialization.
I5805
[Deposit Reject]Bundle part
operation timeout
1. Remove the residual media at the
Bundle part (1).
2. Execute initialization.
I5806
[Deposit Reject]Media remaining
at the Reject part
1. Open the door of Reject(9) part and
remove the residual media.
2. Execute initialization.
I5807
[Deposit Reject]Retract Box is not
on the home position.
1. Check whether the Retract Box(13) is
on the home position.
2. Execute initialization.
I5808
[Deposit Reject] Media remains at
the first drive part and the BC part
or the BC is open.
1. Remove the residual media at the
SCM(2) and BC(3).
2. Execute initialization.
I5809
[Deposit Reject]Media remaining
at the Alignment part
1. Alignment(4) part residual media
2. Execute initialization.
I580A
[Deposit Reject]Media remaining
at the Recognition part
1. Remove the residual media at the
Recognition(5).
2. Execute initialization.
I580B
[Deposit Reject]Media remaining
at the BM2 connection part
1. Open the BM2(7) and remove the
residual media at the moving path.
2. Execute initialization.
I580C
[Deposit Reject]Media remaining
at 3-Way Gate 1
1. Open the BM2(7) and remove the
residual media at the moving path (7, 8).
2. Execute initialization.
I580D
[Deposit Reject]Media remaining
at 3-Way Gate 2
1. Open the BM2(12) and remove the
residual media at the moving path (8,
10).
2. Execute initialization.
I580E
[Deposit Reject]Media remaining
at the Escrow entry part
1. Open the BM2(12) and remove the
residual media at the moving path (10,
12).
2. Execute initialization.