Error Code Manual Chapter2. Bill Recycling Machine (BRM)
2-102
© 2014
Nautilus Hyosung Inc.
All Rights Reserved.
Code
Problem Description
Troubleshooting
53A2B00
Status of remaining notes on
the Return Transport
Path(GS022) before the
operation during Deposit End.
1. Open the lower unit
2. Open the Mid Transport Path
3. Remove the banknotes and the
foreign substance from the reject
cassette (19)
4. Check whether the sensor is
contaminated or not if there are No
notes or substance
53A2G00
Status of remaining notes on
the Return Transport Path
(GS614) before the operation
during Deposit End.
1. Open the upper unit
2. Open the customer service module
(CSM)
3. Remove notes and substance in the
CSM(3)
4. Check whether the sensor is
contaminated or not if there are No
notes or substance
53A2H00
Status of remaining notes on
the Return Transport Path
(GS618) before the operation
during Deposit End .
1. Open the upper unit
2. Open the customer service module
(CSM)
3. Remove notes and substance in the
Rear Transport Path(11)
4. Check whether the sensor is
contaminated or not if there are No
notes or substance
53A2J00
Status of remaining notes on
the Return Transport Path
(GS619) before the operation
during Deposit End .
1. Open the upper unit
2. Open the customer service module
(CSM)
3. Remove notes and substance in the
Rear Transport Path(11)
4. Check whether the sensor is
contaminated or not if there are No
notes or substance
53A2K00
Status of remaining notes on
the Transport Path (GS703)
before the operation during
Deposit End .
1. Open the upper unit
2. Open the TE(Temporary Escrow) (12)
3. Rotate a knob of TE(12)
4. Remove notes and substance in the
Rear Transport Path(11)
53A2M00
Status of remaining notes on
the Transport Path (GS031)
before the operation during
Deposit End .
1. Open the lower unit
2. Rotate the knob of the Mid Transport
Path
3. Remove notes and substance in the
Mid Transport Path(13)
4. Check whether the sensor is
contaminated or not if there are No
notes or substance
53A2N00
Status of remaining notes on
the Return Transport
Path(GS032) before the
operation during Deposit
End .
1. Open the lower unit
2. Rotate the knob of the Mid Transport
Path
3. Remove notes and substance in the
Mid Transport Path(13)
4. Check whether the sensor is
contaminated or not if there are No
notes or substance