Chapter2. Bill Recycling Machine (BRM) Error Code Manual
© 2014
Nautilus Hyosung Inc.
All Rights Reserved.
2-181
Code
Problem Description
Troubleshooting
565S300
An inoperable command,
Withdrawal Ready is issued to
RC5 during Withdrawal Ready.
1. Operate to initialize BRM(Recovery)
2. Reboot the system when same error
occurred (message timeout error) after
initialization
5662100
Error of notes remaind in the
CSM during Withdrawal
Ready.
1. Open the upper unit
2. Open the CSM(1)
3. Remove notes and substance in the
CSM(1)
4. Check whether the sensor is
contaminated or not if there are No
notes or substance
5662400
Undefined command error of
CSM during Withdrawal
Ready.
1. Operate to initialize BRM(Recovery)
566G100
Error of BP stack position
movement during Withdrawal
Ready.
1. Open the upper unit
2. Open the CSM(1) shetter
3. Check the notes and substance
inside of the CSM
566G200
Error of BP deposit position
movement during Withdrawal
Ready.
1. Open the upper unit
2. Open the CSM(1) shetter
3. Check the notes and substance
inside of the CSM
566G300
Error of BP separate position
movement during Withdrawal
Ready.
1. Open the upper unit
2. Open the CSM(1) shetter
3. Check the notes and substance
inside of the CSM
566G400
BP separate control error
during Withdrawal Ready .
1. Open the upper unit
2. Open the CSM(1) shetter
3. Check the notes and substance
inside of the CSM
566G500
BP notes out error during
Withdrawal Ready .
1. Open the upper unit
2. Open the CSM(1) shetter
3. Check the notes and substance
inside of the CSM
566G800
Failure to revert notes during
Withdrawal Ready (Separate
moter disorder).
1. Open the upper unit
2. Check the notes and substance in the
CSM(2)
3. Check the knob rotates softly in the
CSM(2)
4. Check the GS660 sensor status
566GA00
Failure to move
withdrawal(stack) position of
stack roller during Withdrawal
Ready Stack roller (GM605
disorder).
1. Open the upper unit
2. Check the knob rotates softly in the
CSM(3)
566GB00
Failure to move deposit(stack)
position of stack roller during
Withdrawal Ready Stack
roller (GM605 disorder).
1. Open the upper unit
2. Check the knob rotates softly in the
CSM(3)
566GC00
Failure to control stack roller
during Withdrawal Ready
Stack roller (GM605 disorder).
1. Open the upper unit
2. Check the knob rotates softly in the
CSM(3)