Nautilus Hyosung MX8800 Скачать руководство пользователя страница 554

Страница: 554 / 827

Chapter4. Cash & Check In Module Error Code Manual

Nautilus Hyosung Inc.

4-1

Chapter4. Cash & Check In Module

Code

Problem Description

Troubleshooting

97I0001

A WFSStartUp has already been
issued by the application, without
an intervening WFSCleanUp.

1. Restart the ccim sp

97I0002

The range of versions of XFS API
support requested by the
application is higher than any
supported by this particular XFS
Manager implementation.

1. Restart the ccim sp

97I0003

The range of versions of XFS API
support requested by the
application is lower than any
supported by this particular XFS
Manager implementation.

1. Restart the ccim sp

97I0004

The request was canceled by
WFSCancelAsyncRequest or
WFSCancelBlockingCall.

1. Restart the ccim sp

97I0005

The specified hKey parameter
does not correspond to a currently
open key.

1. Restart the ccim sp

97I0006

The value specified by the
lpszValueName parameter does
not exist in the specified key.

1. Restart the ccim sp

97I0007

The key specified by lpszSubKey
does not exist.

1. Restart the ccim sp

97I0008

The specified value does not exist
within the specified open key.

1. Restart the ccim sp

97I0009

The specified key has subkeys
and cannot be deleted. The
subkeys must be deleted first.

1. Restart the ccim sp

97I0010

The length of the name to be
returned exceeds the length of the
buffer.

1. Restart the ccim sp

97I0011

There are no more subkeys to be
returned (the iSubKey parameter
is greater than the index of the last
subkey).

1. Restart the ccim sp

97I0012

The length of the value to be
returned exceeds the length of the
buffer.

1. Restart the ccim sp

97I0013

The function required device
access, and the device was not
ready or timed out.

1. Restart the ccim sp

97I0015

An internal inconsistency or other
unexpected error occurred in the
XFS subsystem.

1. Restart the ccim sp

97I0016

The lpvOriginal parameter does
not point to a previously allocated
buffer.

1. Restart the ccim sp

97I0017

The specified application handle is
not valid, i.e. was not created by a
preceding create call.

1. Restart the ccim sp

Содержание MX8800



























































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание MX8800

Отзывы:

Nautilus Hyosung MX8800, Руководство пользователя, Страница: 554 / 827

Результаты поиска

Содержание MX8800

Отзывы: