Nautilus Hyosung MX8800, Руководство пользователя, Страница: 137 / 827

Chapter2. Bill Recycling Machine (BRM) Error Code Manual
© 2014
Nautilus Hyosung Inc. All Rights Reserved.
2-133
Code Problem Description Troubleshooting
543G600 Exceeds retry count limit of
detecting RC3 stack
roller´s falling back and
avoiding during Deposit
Cancel. 1. Open the lower unit
2. Open the Mid Transport Path
3. Remove the recycle cassette (C)
4. Put down the Stage after open the
recycle cassette door (C)
5. Check the jam removal knob rotates
softly
543G800 Failure to RC3 push pressure
movement of during Deposit
Cancel. 1. Open the lower unit
2. Open the Mid Transport Path
3. Remove the recycle cassette (C)
4. Put down the Stage after open the
recycle cassette door (C)
5. Check the upper side of the recycle
cassette
543GA00 RC3 solenoid echo error
during Deposit Cancel. 1. Open the lower unit
2. Open the Mid Transport Path
3. Reload the recycle cassette (C) after
removing recycle cassette
4. Replace the cassette when same
error occurs
543GB00 Encoder Sensor(GS307) for
Feed Motor failed to detect
Light status when Feed Motor
runs in stacking direction
during Deposit Cancel. 1. Open the lower unit.
2. Open the Mid Transport Path.
3. Take out the recycle cassette #3 and
open its door.(C)
4. Remove jammed notes or substance
using any wheels on the upper side.
5. See whether GS307 works fine if
there is nothing jammed.
543GC00 Encoder Sensor(GS307) for
Feed Motor failed to detect
Dark status when Feed Motor
runs in stacking direction
during Deposit Cancel. 1. Open the lower unit.
2. Open the Mid Transport Path.
3. Take out the recycle cassette #3 and
open its door.(C)
4. Remove jammed notes or substance
using any wheels on the upper side.
5. See whether GS307 works fine if
there is nothing jammed.
543J300 Failure to RC3 full check
during Deposit Cancel. 1. Open the lower unit
2. Open the Mid Transport Path
3. Remove the recycle cassette (C)
4. Check the stage status after open the
recycle cassette(C)
5. Check contamination status of the
GS312 sensor.
543R100 RC3 message timeout error
during operation ready in the
Deposit Cancel. 1. Operate to initialize BRM(Recovery)
2. Reboot the system when same error
occurred (message timeout error) after
initialization
543R200 RC3 message timeout error
during transation operation in
the Deposit Cancel . 1. Operate to initialize BRM(Recovery)
2. Reboot the system when same error
occurred (message timeout error) after
initialization
543R300 RC3 message timeout error
during postprocessing of
Deposit Cancel Error. 1. Operate to initialize BRM(Recovery)
2. Reboot the system when same error
occurred (message timeout error) after
initialization