Chapter2. Bill Recycling Machine (BRM) Error Code Manual
© 2014
Nautilus Hyosung Inc.
All Rights Reserved.
2-509
Code
Problem Description
Troubleshooting
5Q8HG12
BC spec differs from data write
command paramter during
Retract CSM + TE.
1. Check the BCU specifications.
2. Operate to initialize BRM(Recovery)
3. Reboot the system when same error
occurred after initializatio
5Q8HG20
Error to initialize CIS during
receiving BCU ready command
in the Retract CSM + TE .
1. Operate to initialize BRM(Recovery)
2. Check whether the sensor is
contaminated or not if same error
occures after Initialize
3. Reboot the system when same error
occures even though there is no
substance
5Q8HG21
Error of power on during
receiving BCU ready command
in the Retract CSM + TE .
1. Operate to initialize BRM(Recovery)
2. Check whether the sensor is
contaminated or not if same error
occures after Initialize
3. Reboot the system when same error
occures even though there is no
substance
5Q8HG22
Error of DD sensor initialization
during receiving BCU ready
command in the Retract CSM
+ TE .
1. Operate to initialize BRM(Recovery)
2. Check whether the sensor is
contaminated or not if same error
occures after Initialize
3. Reboot the system when same error
occures even though there is no
substance
5Q8HG23
Error of set up for DD sensor
DAC during receiving BCU
ready command in the Retract
CSM + TE .
1. Operate to initialize BRM(Recovery)
2. Check whether the sensor is
contaminated or not if same error
occures after Initialize
3. Reboot the system when same error
occures even though there is no
substance
5Q8HG24
Error of encoder set-up mode
during receiving BCU ready
command in the Retract CSM
+ TE .
1. Operate to initialize BRM(Recovery)
2. Check whether the sensor is
contaminated or not if same error
occures after Initialize
3. Reboot the system when same error
occures even though there is no
substance
5Q8HG36
Error of recognized mode
during receiving BCU mode
command in the Retract CSM
+ TE .
1. Check to the recoginzed mode
2. Operate to initialize BRM(Recovery)
3. Reboot the system when same error
occurred (message timeout error) after
initialization
5Q8HG37
Error of transaction setting
during receiving BCU mode
command in the Retract CSM
+ TE .
1. Check to the transaction setting
2. Operate to initialize BRM(Recovery)
3. Reboot the system when same error
occurred (message timeout error) after
initialization
5Q8R100
BC message timeout error
during operation ready in the
Retract CSM + TE.
1. Operate to initialize BRM(Recovery)
2. Reboot the system when same error
occurred (message timeout error) after
initialization