Chapter2. Bill Recycling Machine (BRM) Error Code Manual
© 2014
Nautilus Hyosung Inc.
All Rights Reserved.
2-81
Code
Problem Description
Troubleshooting
532G200
Failure to move stack position
of RC2 PP during Deposit End.
1. Open the lower unit
2. Open the Mid Transport Path
3. Remove the recycle cassette (B)
4. Open the recycle cassette door (B)
5. Check cassette status to move stage
up and down
6. Check the lower edge of the
door´s right side(Key part) if you
don´t find any problem
532G400
Failure to upword moving of
PP during RC2 stack roller
retreat movement in the
Deposit End .
1. Open the lower unit
2. Open the Mid Transport Path
3. Remove the recycle cassette (B)
4. Open the recycle cassette door (B)
5. Check cassette status to move stage
up and down
6. Check the lower edge of the
door´s right side(Key part) if you
don´t find any problem
532G500
Failure of RC2 stack roller
retreat during Deposit End.
1. Open the lower unit
2. Open the Mid Transport Path
3. Remove the recycle cassette (B)
4. Put down the Stage after open the
recycle cassette door (B)
5. Check the jam removal knob rotates
softly
532G600
Exceeds retry count limit of
detecting RC2 stack
roller´s falling back and
avoiding during Deposit End.
1. Open the lower unit
2. Open the Mid Transport Path
3. Remove the recycle cassette (B)
4. Put down the Stage after open the
recycle cassette door (B)
5. Check the jam removal knob rotates
softly
532G800
Failure to RC2 push pressure
movement of during Deposit
End.
1. Open the lower unit
2. Open the Mid Transport Path
3. Remove the recycle cassette (B)
4. Put down the Stage after open the
recycle cassette door (B)
5. Check the upper side of the recycle
cassette
532GA00
RC2 solenoid echo error
during Deposit End.
1. Open the lower unit
2. Open the Mid Transport Path
3. Reload the recycle cassette (B) after
removing recycle cassette
4. Replace the cassette when same
error occurs
532GB00
Encoder Sensor(GS207) for
Feed Motor failed to detect
Light status when Feed Motor
runs in stacking direction
during Deposit End.
1. Open the lower unit.
2. Open the Mid Transport Path.
3. Take out the recycle cassette #2 and
open its door.(B)
4. Remove jammed notes or substance
using any wheels on the upper side.
5. See whether GS207 works fine if
there is nothing jammed.