Error Code Manual Chapter2. Bill Recycling Machine (BRM)
2-356
© 2014
Nautilus Hyosung Inc.
All Rights Reserved.
Code
Problem Description
Troubleshooting
5B7R300
TE message timeout error
during postprocessing to
Retract TE Error.
1. Operate to initialize BRM(Recovery)
2. Reboot the system when same error
occurred (message timeout error) after
initialization
5B8HA01
Error GS801A during Retract
TE.
1. Check GS801A
2. Operate to initialize BRM(Recovery)
5B8HA02
Error GS801B during Retract
TE.
1. Check GS801B
2. Operate to initialize BRM(Recovery)
5B8HA03
Error GS801A, GS801B during
Retract TE.
1. Check GS801A, GS801B
2. Operate to initialize BRM(Recovery)
5B8HA04
Error GS802A during Retract
TE.
1. Check GS802A
2. Operate to initialize BRM(Recovery)
5B8HA05
Error GS801A, GS802A during
Retract TE.
1. Check GS801A, GS802A
2. Operate to initialize BRM(Recovery)
5B8HA06
Error GS801B, GS802A during
Retract TE.
1. Check GS801B, GS802A
2. Operate to initialize BRM(Recovery)
5B8HA07
Error GS801A, GS801B,
GS802A during Retract TE.
1. Check GS801A, GS801B, GS802A
2. Operate to initialize BRM(Recovery)
5B8HA08
Error GS802B during Retract
TE.
1. Check GS802B
2. Operate to initialize BRM(Recovery)
5B8HA09
Error GS801A, GS802B during
Retract TE.
1. Check GS801A, GS802B
2. Operate to initialize BRM(Recovery)
5B8HA10
Error GS801B, GS802B during
Retract TE.
1. Check GS801B, GS802B
2. Operate to initialize BRM(Recovery)
5B8HA11
Error GS801A, GS801B,
GS802B during Retract TE.
1. Check GS801A, GS801B, GS802B
2. Operate to initialize BRM(Recovery)
5B8HA12
Error GS802A, GS802B
during Retract TE.
1. Check GS802A, GS802B
2. Operate to initialize BRM(Recovery)
5B8HA13
Error GS801A, GS802A,
GS802B during Retract TE.
1. Check GS801A, GS802A, GS802B
2. Operate to initialize BRM(Recovery)
5B8HA14
Error GS801B, GS802A,
GS802B during Retract TE.
1. Check GS801B, GS802A, GS802B
2. Operate to initialize BRM(Recovery)
5B8HA15
Error GS801A, GS801B,
GS802A, GS802B during
Retract TE.
1. Check GS801A, GS801B, GS802A,
GS802B
2. Operate to initialize BRM(Recovery)
5B8HF03
Error to load shading data of
the CIS during Retract TE.
1. Operate shading in the BC CIS
2. Operate to initialize BRM(Recovery)
5B8HF04
Error to load recognition DB
table during Retract TE.
1.Download DB again after delecting all
recognition DB
2. Operate to initialize BRM(Recovery)
5B8HF05
Error to BC FPGA data
checksum during Retract TE.
1. Check to BC FPGA File
2. Operate to initialize BRM(Recovery)
5B8HF06
Error to BC FPGA
configuration during Retract
TE.
1. Re-download BC FPGA
2. Change the BC B/D if continuous
error.
5B8HF07
Error to load to info of BC
FPGA header during Retract
TE.
1. Re-download BC FPGA
2. Change the BC B/D if continuous
error.
5B8HF08
Error to FPGA initialize during
Retract TE.
1. Re-download BC FPGA
2. Change the BC B/D if continuous
error.
5B8HF09
Error to FPGA Read during
Retract TE.
1. Re-download BC FPGA
2. Change the BC B/D if continuous
error.