Error Code Manual Chapter2. Bill Recycling Machine (BRM)
2-238
© 2014
Nautilus Hyosung Inc.
All Rights Reserved.
Code
Problem Description
Troubleshooting
578HG20
Error to initialize CIS during
receiving BCU ready command
in the Withdrawal .
1. Operate to initialize BRM(Recovery)
2. Check whether the sensor is
contaminated or not if same error
occures after Initialize
3. Reboot the system when same error
occures even though there is no
substance
578HG21
Error of power on during
receiving BCU ready command
in the Withdrawal .
1. Operate to initialize BRM(Recovery)
2. Check whether the sensor is
contaminated or not if same error
occures after Initialize
3. Reboot the system when same error
occures even though there is no
substance
578HG22
Error of DD sensor initialization
during receiving BCU ready
command in the Withdrawal .
1. Operate to initialize BRM(Recovery)
2. Check whether the sensor is
contaminated or not if same error
occures after Initialize
3. Reboot the system when same error
occures even though there is no
substance
578HG23
Error of set up for DD sensor
DAC during receiving BCU
ready command in the
Withdrawal .
1. Operate to initialize BRM(Recovery)
2. Check whether the sensor is
contaminated or not if same error
occures after Initialize
3. Reboot the system when same error
occures even though there is no
substance
578HG24
Error of encoder set-up mode
during receiving BCU ready
command in the Withdrawal .
1. Operate to initialize BRM(Recovery)
2. Check whether the sensor is
contaminated or not if same error
occures after Initialize
3. Reboot the system when same error
occures even though there is no
substance
578HG36
Error of recognized mode
during receiving BCU mode
command in the Withdrawal.
1. Check to the recoginzed mode
2. Operate to initialize BRM(Recovery)
3. Reboot the system when same error
occurred (message timeout error) after
initialization
578HG37
Error of transaction setting
during receiving BCU mode
command in the Withdrawal.
1. Check to the transaction setting
2. Operate to initialize BRM(Recovery)
3. Reboot the system when same error
occurred (message timeout error) after
initialization
578R100
BC message timeout error
during operation ready in the
Withdrawal.
1. Operate to initialize BRM(Recovery)
2. Reboot the system when same error
occurred (message timeout error) after
initialization
578R200
BC message timeout error
during transaction operation in
the Withdrawal.
1. Operate to initialize BRM(Recovery)
2. Reboot the system when same error
occurred (message timeout error) after
initialization