Chapter4. Cash & Check In Module Error Code Manual
© 2014
Nautilus Hyosung Inc.
All Rights Reserved.
4-23
Code
Problem Description
Troubleshooting
I1812
[Initialize]Cassette1 is not on the
home position.
1. Check whether the Cassette1(14) is
on the home position. 2. Execute
initialization.
I1813
[Initialize]No Cassette.
1. Check whether the Cassette1(14) and
the Cassette2(15) are on the home
position.
2. Execute initialization.
I1814
[Initialize]Timeout occurs in
operation.
1. Remove the residual media in the
device.
2. Execute initialization.
I1815
[Initialize]Timeout occurs in
operation.
1. Remove the residual media in the
device.
2. Execute initialization.
I1816
[Initialize]Timeout occurs in
operation.
1. Remove the residual media in the
device.
2. Execute initialization.
I1817
[Initialize]Timeout occurs in
operation.
1. Remove the residual media in the
device.
2. Execute initialization.
I1818
[Initialize]Timeout occurs in
operation.
1. Remove the residual media in the
device.
2. Execute initialization.
I1819
[Initialize]Failed to inhale the
media.
1. Remove the residual media in the
device.
2. Execute initialization.
I181B
[Initialize]When executing Retract,
timeout occurs while picking up
back the media.
1. Remove the residual media in the
device.
2. Execute initialization.
I1823
[Initialize]BC Cover Open fault.
1. Remount the BC Cover(3) and
execute initialization.
2. If the fault is not recovered, reboot the
system.
I1829
[Initialize]Bundle residual fault
1. Remove the residual media at the
Bundle part (1).
2. Execute initialization.
I182A
[Initialize] Error in processing the
number of media at the Reject
part
1. Open the BM2(7) and BM2(12) and
remove the residual media at the moving
path (8, 9, 10).
2. Execute initialization.
I182B
[Initialize] Error in processing the
number of media at the Escrow
part
1. Open the BM2(12) and remove the
residual media at the moving path (8,
10, 12).
2. Execute initialization.
I182C
[Initialize]Timeout occurs when
moving the media at the Reject to
the Bundle.
1. Remove the residual media at the
Bundle(1), SCM(2), and Reject part (9).
2. Execute initialization.
I182D
[Initialize]Timeout occurs when
moving the media at the Reject to
the Bundle and then processing
the media.
1. Remove the residual media at the
Bundle(1), SCM(2), and Reject part (9).
2. Execute initialization.
I182E
[Initialize]Timeout occurs when
checking the residual media in the
Bundle.
1. Remove the residual media at the
Bundle(1), SCM(2), and Reject part (9).
2. Execute initialization.