Chapter4. Cash & Check In Module Error Code Manual
© 2014
Nautilus Hyosung Inc.
All Rights Reserved.
4-107
Code
Problem Description
Troubleshooting
I4516
[Deposit Count/Check] Residual
detection (ESS03) Jam before
Escrow Drum when outputting the
media.
1. Open the Escrow Part(12).
2. Remove the ESS03 media and
pollution.
3. Execute CCIM initialization.
I4517
[Deposit Count/Check]Light jam at
the Escrow output check sensor
(ESS04) when outputting the
media.
1. Open the Escrow Part(12).
2. Remove the ESS04 media and
pollution.
3. Execute CCIM initialization. 4. Check
the Escrow Drum running motor
(ESM01).
I4518
[Deposit Count/Check]Residual
media in the Escrow (ESS01,
ESS02) when preparing for media
discharge.
1. Open the Escrow Part(12).
2. Remove the ESS01 and ESS02
media and pollution.
3. Execute CCIM initialization.
I4519
[Deposit Count/Check] Escrow
Trigger2 (ESS04) is not detected
and timeout occurs when
outputting the media.
1. Open the Escrow Part(12).
2. Remove the ESS04 media and
pollution.
3. Execute CCIM initialization. 4. Check
the Escrow Drum running motor
(ESM01).
I451A
[Deposit Count/Check] Residual
detection sensor (ESS03) Jam
before Escrow Drum when
outputting the media.
1. Open the Escrow Part(12).
2. Remove the ESS03 media and
pollution.
3. Execute CCIM initialization.
I451B
[Deposit Count/Check]Jam at the
Escrow output check sensor
(ESS04) when outputting the
media.
1. Open the Escrow Part(12).
2. Remove the ESS04 media and
pollution.
3. Execute CCIM initialization.
I451C
[Deposit Count/Check]Residual
media in the Escrow (ESS01,
ESS02) when preparing for media
discharge.
1. Open the Escrow Part(12).
2. Remove the ESS01 and ESS02
media and pollution.
3. Execute CCIM initialization.
I4520
[Deposit Count/Check]For Escrow
Drum winding (50ms+2591Step),
the tape start is not light-detected
for 50ms continuously, and a fault
occurs when 6s is exceeded.
1. Open the Escrow Part(12).
2. Remove the ESS06 media and
pollution.
3. Check Motor (ESM01)
4. Execute CCIM initialization.
I4521
[Deposit Count/Check]For Escrow
Drum winding (50ms+2591Step),
the Drum motor is not stopped
and a fault occurs when a timeout
occurs.
1. Execute CCIM initialization.
2. Reboot the system when the same
error occurs after initialization.
I4522
[Deposit Count/Check]For Escrow
Drum winding (50ms+5730Step),
the tape start is not light-detected
for 50ms continuously, and a fault
occurs when 6s is exceeded.
1. Open the Escrow Part(12).
2. Remove the ESS06 media and
pollution.
3. Check Motor (ESM01)
4. Execute CCIM initialization.
I4523
[Deposit Count/Check]For Escrow
Drum winding (50ms+5730Step),
the Drum motor is not stopped
and a fault occurs when a timeout
occurs.
1. Execute CCIM initialization.
2. Reboot the system when the same
error occurs after initialization.