Error Code List Chapter4. Cash & Check In Module
4-118
© 2014
Nautilus Hyosung Inc.
All Rights Reserved.
Code
Problem Description
Troubleshooting
I4B01
[Deposit Count/Check]Jam at the
BC entry sensor (BCS01,BCS02).
1. Open the BC cover(3) and remove the
residual media and alien materials.
2. Check the BC Lock state.
I4B02
[Deposit Count/Check]Jam at the
Align detection sensor (AAS02).
1. Open the alignment(4) cover and
remove the residual media and alien
materials.
2. Initialize the device.
3. Check the alignment(4) cover lock
state.
I4B03
[Deposit Count/Check]Jam at the
Align detection sensor (AAS03).
1. Open the alignment(4) cover and
remove the residual media and alien
materials.
2. Initialize the device.
3. Check the alignment(4) cover lock
state.
I4B04
[Deposit Count/Check]Jam at the
Recog detection sensor (RCS01).
1. Remove the internal media and alien
materials in the Recognition(5).
2. Initialize the device.
3. If the same fault continuously occurs
after checking the device, replace the
Recognition(5) Module.
I4B05
[Deposit Count/Check]Jam at the
Align detection sensor (AAS05)
1. After opening the BM2(7) moving
path, open the Alignment(4) Guide2 to
remove media and alien materials.
2. Initialize the device.
7. If the same fault continuously occurs
after checking the device, replace the
Alignment(4) Module.
I4B06
[Deposit Count/Check]Jam at the
Align entry detection sensor
(AAS06).
1. Open the alignment(4) cover and
remove the residual media and alien
materials.
2. Initialize the device.
3. Check the alignment(4) cover lock
state.
I4B07
[Deposit Count/Check]Jam at
Recog exit moving path sensor
(FDS07)
1. Open the BM2(7) Upper Guide and
remove the residual media and alien
material.
2. Open the BM6 moving path to remove
the residual media.
I4B09
[Deposit Count/Check]Jam at the
second moving path sensor
(FDS09).
1. Open the BM2(7) and then remove
the residual media and alien materials.
2. Check the 3Way-Gate1 operation
state (FDM06)
I4B12
[Deposit Count/Check]Jam at the
3Way2 control sensor (FDS12)
1. Open the third moving path (8) and
then remove the residual media and
alien materials.
2. Check the 3Way-Gate2 operation
state (FDM07)
I4B15
[Deposit Count/Check]]Jam at
Escrow entry sensor (FDS15)
1. Open the BM7 moving path and then
remove the residual media and alien
materials.
I4B16
[Deposit Count/Check]Jam at RT
Box entry detection sensor
(FDS16)
1. Open the BM3 moving path and then
remove the residual media and alien
materials.
2. Check the arrangement state of
banknotes in the RT box.