Nautilus Hyosung MX8800, Руководство пользователя, Страница: 685 / 827

Error Code List Chapter4. Cash & Check In Module
4-132 © 2014 Nautilus Hyosung Inc. All Rights Reserved.
Code Problem Description Troubleshooting
I50C2 [Deposit Reject]A wrong size is
received during USB CONTROL
PIPE communication. 1. Execute CCIM initialization.
2. Reboot the system when the same
error occurs after initialization.
I50C3 [Deposit Reject]The size of USB
bulk data is 0 or not the multiple of
64. 1. Execute CCIM initialization.
2. Reboot the system when the same
error occurs after initialization.
I50CF [Deposit Reject]Fault of
transmitting the same seq of SP. 1. Execute CCIM initialization.
2. Reboot the system when the same
error occurs after initialization.
I5301 [Deposit Reject]Low-speed
moving path sensor fault. 1. Open the door at the Bundle side and
remove the residual media.
2. Check and remove the alien materials
in the Bundle low-speed wheel position
control (BDS14) sensor.
3. If no alien material exists, check
whether the sensor is polluted.
4. Initialize the device.
I5302 [Deposit Reject]Low-speed
moving path up fault 1. Check whether the Bundle low-speed
moving path (BDM02) is running.
2. Reboot the system when the same
error occurs.
3. Replace the motor and cables when
the same error occurs after checking the
device.
I5303 [Deposit Reject]Low-speed
moving path down fault 1. Check whether the Bundle low-speed
moving path (BDM02) is running.
2. Reboot the system when the same
error occurs.
3. Replace the motor and cables when
the same error occurs after checking the
device.
I5304 [Deposit Reject]Shutter sensor
fault. 1. Check and remove the alien materials
in the Bundle Shutter Open (BDS11)
and Close(BDS12) sensors.
2. If no alien material exists, check
whether the sensor is polluted.
I5305 [Deposit Reject]Shutter Open
fault. 1. Check whether the part connected to
the external shutter normally operates.
2. Check whether the shutter driving
motor (BDM01) runs.
3. Check the motor connection cable.
I5306 [Deposit Reject]Shutter Close
fault. 1. Check whether the part connected to
the external shutter normally operates.
2. Check whether the shutter driving
motor (BDM01) runs.
3. Check the motor connection cable.
I5307 [Deposit Reject]Billpress sensor
fault. 1. Check and remove the alien materials
in the Bundle Bill Press part (BDS15,
BDS16) sensors.
2. If no alien material exists, check
whether the sensor is polluted.