Chapter4. Cash & Check In Module Error Code Manual
© 2014
Nautilus Hyosung Inc.
All Rights Reserved.
4-213
Code
Problem Description
Troubleshooting
I820B
[Deposit End] Failure to detect the
bottom (CCS05) when the
Cassette2 Push Plate Stack
moves.
1. Check the arrangement state of
banknotes in the Cassette.
2. Check the Stack position sensor
(CCS06) lever operation state.
3. If the Push Plate is not at the bottom,
check the alien materials at the
Cassette2 Bottom sensor(CCS05).
I8501
[Deposit End]Fault of calling a
undefined command from Escrow.
1. Execute CCIM initialization.
2. Reboot the system when the same
error occurs after initialization.
I8502
[Deposit End]Fault of performing a
undefined process flow from
Escrow.
1. Execute CCIM initialization.
2. Reboot the system when the same
error occurs after initialization.
I8503
[Deposit End]Escrow entry
(ESS03, ESS04) residual fault
when preparing for media winding
when Escrow has the media
1. Open the Escrow Part(12).
2. Remove the media at the Escrow
Drum residual check (ESS03) and
output check (ESS04) sensor part and
the pollution.
3. Execute CCIM initialization.
I8504
[Deposit End]Tape End when
preparing for media winding when
Escrow has media
(ESS07) Detection fault.
1. Open the Escrow Part(12).
2. Manually remove media from Escrow.
3. Initialize.
I8505
[Deposit End]Escrow entry
(ESS03, ESS04) residual fault
when preparing for media winding
when Escrow has no media
1. Open the Escrow Part(12).
2. Remove the media at the Escrow
Drum residual check (ESS03) and
output check (ESS04) sensor part and
the pollution.
3. Execute CCIM initialization.
I8506
[Deposit End]Escrow internal
(ESS01,02,03,04) residual fault
when preparing for media winding
when Escrow has no media
1. Open the Escrow Part(12).
2. Remove the media residual at the
Escrow (ESS01, ESS02, ESS03,
ESS04) and the pollution.
3. Execute CCIM initialization.
I8507
[Deposit End]Residual media at
the Escrow entry part (ESS03,
ESS04) when preparing for media
output
1. Open the Escrow Part(12).
2. Remove the media at the Escrow
Drum residual check (ESS03) and
output check (ESS04) sensor part and
the pollution.
3. Execute CCIM initialization.
I8508
[Deposit End]Escrow Tape
Start(ESS06) detection fault when
preparing for media output.
1. Open the Escrow part (12) and
remove the ESS06 media and pollution.
2. Rotate the Escrow Knob in clock-wise
three times.
3. Execute CCIM initialization.
I8509
[Deposit End]Residual media at
the Escrow entry part (ESS03,
ESS04) when reset the Escrow
mode
1. Open the Escrow Part(12).
2. Remove the media at the Escrow
Drum residual check (ESS03) and
output check (ESS04) sensor part and
the pollution.
3. Execute CCIM initialization.