Chapter2. Bill Recycling Machine (BRM) Error Code Manual
© 2014
Nautilus Hyosung Inc.
All Rights Reserved.
2-193
Code
Problem Description
Troubleshooting
56AAE00
Status of UTC2 full before the
operation during Withdrawal
Ready .
1. Open the upper unit
2. Open the forge note cassette(10
3. Check the forge note cassette(10) is
full
56AAF00
Status of RC empty before the
operation during Withdrawal
Ready.
1. Open the lower unit
2. Open the Mid Transport Path
3. Check the residual notes quantity in
the recycle cassettes(A~E)
56AE100
Received operation command
without Initail Info Set during
Withdrawal Ready.
1. Restart over AP-SP
2. Do transation operation follow by set
up read system Info for TM Test-> Initail
Info Set -> Initialization
56AE200
Status on not operation
receiption command during
Withdrawal Ready.
1. Restart over AP-SP
2. Do transation operation follow by set
up read system Info for TM Test-> Initail
Info Set -> Initialization
56AE300
Received execute command
without Read System Info.
during Withdrawal Ready.
1. Restart over AP-SP
2. Do transation operation follow by set
up read system Info for TM Test-> Initail
Info Set -> Initialization
56AE400
Withdrawal Ready transaction
was executed without
Initializing after power on.
1. Restart over AP-SP
2. Do transation operation follow by set
up read system Info for TM Test-> Initail
Info Set -> Initialization
56AE600
Error to received Withdrawal
Ready during TE Button
Operating.
1. Operate to initialize BRM(Recovery)
2. Reboot the system when same error
occurred (message timeout error) after
initialization
56AEE00
RBU RS485 communication
sequence disorder during
Withdrawal Ready.
1. Operate to initialize BRM(Recovery)
2. Reboot the system when same error
occurred (message timeout error) after
initialization
56AEF00
RBU RS485 connection line
disorder during Withdrawal
Ready.
1. Operate to initialize BRM(Recovery)
2. Reboot the system when same error
occurred (message timeout error) after
initialization
56AH500
Error to
NVRAM(128denominations)
Read/ Write during Withdrawal
Ready.
1. Operate to initialize BRM(Recovery)
2. Reboot the system when same error
occurred (message timeout error) after
initialization
56AR100
Message timeout error during
operation ready in the
Withdrawal Ready .
1. Operate to initialize BRM(Recovery)
2. Reboot the system when same error
occurred (message timeout error) after
initialization
56AR200
Message timeout error during
transation operation in the
Withdrawal Ready.
1. Operate to initialize BRM(Recovery)
2. Reboot the system when same error
occurred (message timeout error) after
initialization
56AR300
Message timeout error during
error postprocessing of
Withdrawal Ready.
1. Operate to initialize BRM(Recovery)
2. Reboot the system when same error
occurred (message timeout error) after
initialization