Nautilus Hyosung MX8800, Руководство пользователя

Страница: 672 / 827

Chapter4. Cash & Check In Module Error Code Manual
© 2014 Nautilus Hyosung Inc. All Rights Reserved.
4-119
Code Problem Description Troubleshooting
I4B18 [Deposit Count/Check]Jam at
Cassette1 entry detection sensor
(FDS18) 1. Open the BM2(7) and remove the
residual media at the moving path (6)
and Cassette1(14) entry.
2. Execute initialization.
I4B19 [Deposit Count/Check]Jam at
Cassette2entry detection sensor
(FDS19) 1. Remove the residual media at the
Cassette2 entry (11).
2. Execute initialization.
I4B21 [Deposit Count/Check] Residual
fault in the SCM. 1. SCM(2) Open
2. Remove the notes and alien materials
in the SCM. and Bundle.
I4B22 [Deposit Count/Check] Residual
fault in the SCM. 1. SCM(2) Open
2. Remove the notes and alien materials
in the SCM. and Bundle.
I4B23 [Deposit Count/Check] Residual
fault in the SCM. 1. SCM(2) Open
2. Remove the notes and alien materials
in the SCM. and Bundle.
I4B24 [Deposit Count/Check] Residual
fault in the SCM. 1. SCM(2) Open
2. Remove the notes and alien materials
in the SCM. and Bundle.
I4B25 [Deposit Count/Check] Residual
fault in the SCM. 1. SCM(2) Open
2. Remove the notes and alien materials
in the SCM. and Bundle.
I4B26 [Deposit Count/Check] Residual
fault in the SCM. 1. SCM(2) Open
2. Remove the notes and alien materials
in the SCM. and Bundle.
I4B27 [Deposit Count/Check] Jam at the
BC entry sensor (BCS01). 1. Open the BC cover(3) and remove the
residual media and alien materials.
2. Check the BC Lock state.
I4B28 [Deposit Count/Check] Jam at the
BC entry sensor (BCS02). 1. Open the BC cover(3) and remove the
residual media and alien materials.
2. Check the BC Lock state.
I4B29 [Deposit Count/Check] Jam at the
BC entry sensor (BCS01,BCS02). 1. Open the BC cover(3) and remove the
residual media and alien materials.
2. Check the BC Lock state.
I4B2A [Deposit Count/Check]Jam at
Escrow entry sensor (FDS15) 1. Open the BM4 moving path and then
remove the residual media and alien
materials.
I4B2B [Deposit Count/Check]Jam at the
Align entry detection sensor
(AAS06). 1. Open the alignment(4) cover and
remove the residual media and alien
materials.
2. Initialize the device.
3. Check the alignment(4) cover lock
state.
I4B2C [Deposit Count/Check]Align
detection sensor (AAS05) jam 1. After opening the BM2(7) moving
path, open the Alignment(4) Guide2 to
remove media and alien materials.
2. Initialize the device.
4. If the same fault continuously occurs
after checking the device, replace the
Alignment(4) Module.