Chapter2. Bill Recycling Machine (BRM) Error Code Manual
© 2014
Nautilus Hyosung Inc.
All Rights Reserved.
2-453
Code
Problem Description
Troubleshooting
5K0N900
Pick-up count did not match up
with stack count when
separate end in the Withdrawal
Reject.
1. Operate to initialize BRM(Recovery)
5K0NA00
Checksum error when
separate TE notes from TE
during Withdrawal Reject.
1. Operate to initialize BRM(Recovery)
5K0NC00
Failure to check the last note
at the termination of mid
transport path during
Withdrawal Reject.
1. Operate to initialize BRM(Recovery)
2. Reboot the system when same error
occurred (message timeout error) after
initialization
5K0Q100
UTC removal error during
Withdrawal Reject.
1. Open the upper unit
2. Check removal of the cassette not
received(9)
5K0Q200
TE open error during
Withdrawal Reject.
1. Open the upper Unit
2. Check open/close of TE(12)
5K0Q300
BMU inter lock error during
Withdrawal Reject.
1. Check Load/Removal of the upper
unit
2. Replace a cherry switch when error
occures
5K0Q400
BMU removal error during
Withdrawal Reject.
1. Check Load/Removal of the upper
unit
5K0Q500
Safe door open error during
Withdrawal Reject.
1. Check the safe door open
5K0Q600
CSM open error during
Withdrawal Reject.
1. Open the upper unit
2. Check to open/close CSM
3. Check the sensors GS011
5K0Q700
RJC removal error during
Withdrawal Reject.
1. Open the lower unit
2. Open the Mid Transport Path
3. Check the reject CST(21)
Load/Removal
5K0Q800
BMD inter lock error during
Withdrawal Reject.
1. Check the lower Unit load/removal
2. Replace a cherry switch when error
occures
5K0Q900
BMD removal error during
Withdrawal Reject.
1. Check the lower Unit load/removal
5K0QA00
BC open error during
Withdrawal Reject.
1. Open the upper unit
2. Open the customer service module
(CSM)
3. Check the lock lever in the BC
5K0R100
BM message timeout error
during operation ready in the
Withdrawal Reject.
1. Operate to initialize BRM(Recovery)
2. Reboot the system when same error
occurred (message timeout error) after
initialization
5K0R200
BM message timeout error
during transaction operation in
the Withdrawal Reject.
1. Operate to initialize BRM(Recovery)
2. Reboot the system when same error
occurred (message timeout error) after
initialization
5K0R300
BM message timeout error
during postprocessing of
Withdrawal Reject Error.
1. Operate to initialize BRM(Recovery)
2. Reboot the system when same error
occurred (message timeout error) after
initialization