Error Code Manual Chapter2. Bill Recycling Machine (BRM)
2-6
© 2014
Nautilus Hyosung Inc.
All Rights Reserved.
Code
Problem Description
Troubleshooting
511G800
Failure to RC1 push pressure
movement during Deposit
Ready.
1. Open the lower unit.
2. Open the Mid Transport Path.
3. Remove the recycle cassette (A) .
4. Put down the Stage after open the
recycle cassette door (A)
5.Check upper side of the recycle
cassette
511GA00
RC1 solenoid echo error duing
Deposit Ready.
1. Open the lower unit.
2. Open the Mid Transport Path.
3. Remove the recycle cassette (A) .
4. Reload the recycle cassette (A) after
removing recycle cassette
5. Change the cassette when same
error occur
511GB00
Encoder Sensor(GS107) for
Feed Motor failed to detect
Light status when Feed Motor
runs in stacking direction duing
Deposit Ready.
1. Open the lower unit.
2. Open the Mid Transport Path.
3. Take out the recycle cassette #1 and
open its door.(A)
4. Remove jammed notes or substance
using any wheels on the upper side.
5. See whether GS107 works fine if
there is nothing jammed.
511GC00
Encoder Sensor(GS107) for
Feed Motor failed to detect
Dark status when Feed Motor
runs in stacking direction duing
Deposit Ready.
1. Open the lower unit.
2. Open the Mid Transport Path.
3. Take out the recycle cassette #1 and
open its door.(A)
4. Remove jammed notes or substance
using any wheels on the upper side.
5. See whether GS107 works fine if
there is nothing jammed.
511J300
RC1 full check failure during
Deposit Ready.
1. Open the lower unit.
2. Open the Mid Transport Path.
3. Remove the recycle cassette (A) .
4. Check the stage status after open the
recycle cassette(A)
6.Check contamination of GS112 sensor
511S100
Undefined return values of
RC1 during Deposit Ready.
1. Operate to initialize BRM(Recovery)
2. Reboot the system when same error
occurred (message timeout error) after
initialization
511S200
Undefined command of RC1
during Deposit Ready .
1. Operate to initialize BRM(Recovery)
2. Reboot the system when same error
occurred (message timeout error) after
initialization
5121100
GS201 sensor jam during
Deposit Ready.
1. Open the lower unit.
2. Open the Mid Transport Path.
3. Remove the recycle cassette (B) .
4. Put down the Stage after open the
recycle cassette door (B)
5.Remove notes and substance using
jam removal Knob in the upper side
6. Check whether the sensor is
contaminated or not if there are No
notes or substance