Error Code List Chapter4. Cash & Check In Module
4-238
© 2014
Nautilus Hyosung Inc.
All Rights Reserved.
Code
Problem Description
Troubleshooting
I950C
[Retract]Escrow Tape End
(ESS07) detection fault when
executing media winding.
1. Open the Escrow part (12) and
remove the ESS07 media and pollution.
2. Rotate the Escrow Knob in
counterclock-wise three times.
3. Execute CCIM initialization.
I950D
[Retract]Escrow Full (ESS05)
detection fault when executing
media winding.
1. Open the Escrow part (12) and
remove the ESS05 media and pollution.
2. Rotate the Escrow Knob in
counterclock-wise three times.
3. Execute CCIM initialization.
I950E
[Retract]Light jam at the Escrow
output check sensor (ESS04)
when executing media winding.
1. Open the Escrow Part(12).
2. Remove the media between the
Escrow entry (FDS15) and output check
(ESS04) sensor part and the pollution.
3. Execute CCIM initialization.
I950F
[Retract]Dark jam at the Escrow
output check sensor (ESS04)
when executing media winding.
1. Open the Escrow Part(12).
2. Remove the ESS04 media and
pollution.
3. Execute CCIM initialization.
I9510
[Retract]Fault of performing a
undefined process flow from
Escrow.
1. Execute CCIM initialization.
2. Reboot the system when the same
error occurs after initialization.
I9511
[Retract]Jam between the Escrow
entry sensor (ESS04) and
(FDS15) while storing the media.
1. Open the Escrow Part(12).
2. Remove the media at the Escrow
entry (FDS15) and output check
(ESS04) sensor part and the pollution.
3. Execute CCIM initialization.
I9512
[Retract]Jam between the Escrow
entry (ESS04) and (FDS15) when
processing drum full while storing
the media.
1. Open the Escrow Part(12).
2. Remove the media at the Escrow
entry (FDS15) and output check
(ESS04) sensor part and the pollution.
3. Execute CCIM initialization.
I9513
[Retract]Escrow Tape End
(ESS07) detection fault when
executing media winding.
1. Open the Escrow part (12) and
remove the ESS07 media and pollution.
2. Rotate the Escrow Knob in
counterclock-wise three times.
3. Execute CCIM initialization.
I9514
[Retract]Escrow Full (ESS05)
detection fault when storing
additional media while terminating
media winding.
1. Open the Escrow part (12) and
remove the ESS05 media and pollution.
2. Rotate the Escrow Knob in
counterclock-wise three times.
3. Execute CCIM initialization.
I9515
[Retract]Fault of performing a
undefined process flow from
Escrow.
1. Execute CCIM initialization.
2. Reboot the system when the same
error occurs after initialization.
I9516
[Retract] Residual detection
(ESS03) Jam before Escrow Drum
when outputting the media.
1. Open the Escrow Part(12).
2. Remove the ESS03 media and
pollution.
3. Execute CCIM initialization.
I9517
[Retract]Light jam at the Escrow
output check sensor (ESS04)
when outputting the media.
1. Open the Escrow Part(12).
2. Remove the ESS04 media and
pollution.
3. Execute CCIM initialization. 4. Check
the Escrow Drum running motor
(ESM01).