Building Technologies
RXT20.1 – Service terminal
CA2N3851en_02 / 12.01.2007
1/6
3
851
DESIGO™ RX
Service terminal
RXT20.1
•
Hand-held service terminal with built-in connecting cable
•
Controller and room unit status display
•
Remote operation of DESIGO RXB and RXC room controller service pins
•
NOT SUITABLE FOR RXB VERSION 2.36 AND HIGHER
•
Error message display
•
Room temperature display, operating mode and temperature setpoint
adjustment
•
PPS2 interface to controller
•
Socket for commissioning and service too
The RXT20.1 service terminal is used for simple diagnostics of room controllers and
room units, and for remote operation of the DESIGO RXB and RXC controller service
pins. The built-in connecting cable of the service terminal is plugged directly into the
roomcontroller to be interrogated, or into the room unit of the controller concerned.
The service terminal displays the status of the controller and room unit, the “wink” func-
tion, error messages or additional information of the room unit.
The service pin of the connected DESIGO RXB / RXC controller can be operated re-
motely with the function keys on the service terminal. This function is especially useful
for addressing controllers installed in concealed locations.
The service terminal also incorporates a RJ45 socket for the bus
–
RXC: for RXT10 commissioning and service tool (L
ON
W
ORKS
® bus connection)
–
RXB: for KNX / EIB bus connection (not for Version 2.36 and higher).
When placing an order, please specify the quantity, product name and type code.
Example:
1 Service
terminal
RXT20.1
Essentially, the service terminal consists of the housing, the base plate and the cable for
connection to the controller or room unit. The housing and the base plate are connected
by a snap-fitting mechanism.
Use
Ordering
Mechanical design
