Error Code Manual Chapter2. Bill Recycling Machine (BRM)
2-206
© 2014
Nautilus Hyosung Inc.
All Rights Reserved.
Code
Problem Description
Troubleshooting
570DN00
Sensor error during
Withdrawal .
1. Operate to initialize BRM(Recovery)
570DP00
Connection disorder error
during Withdrawal .
1. Operate to initialize BRM(Recovery)
570DQ00
Full&ETC error during
Withdrawal .
1. Operate to initialize BRM(Recovery)
570DR00
Error of failure to synchronizing
recognition during
Withdrawal .
1. Operate to initialize BRM(Recovery)
570DS00
Error of failure to synchronizing
recognition during
Withdrawal .
1. Operate to initialize BRM(Recovery)
570DT00
Error of failure to synchronizing
recognition during
Withdrawal .
1. Operate to initialize BRM(Recovery)
570DU00
Error of failure to synchronizing
recognition during
Withdrawal .
1. Operate to initialize BRM(Recovery)
570DV00
Error of failure to synchronizing
recognition during
Withdrawal .
1. Operate to initialize BRM(Recovery)
570DW00
Error of failure to synchronizing
recognition during
Withdrawal .
1. Operate to initialize BRM(Recovery)
570DX00
Error of failure to synchronizing
recognition during
Withdrawal .
1. Operate to initialize BRM(Recovery)
570DY00
Error of failure to synchronizing
recognition during
Withdrawal .
1. Operate to initialize BRM(Recovery)
570F100
GM001 motor removal during
Withdrawal .
1. Open the upper unit
2. Check the Front Transport Path(4)
knob rotates softly
3.Check remained Notes and substance
in the upper Transport Path
4. Check the GS804 Sensor
570F200
GM002 motor removal during
Withdrawal .
1. Open the upper unit
2. Check the Rear Transport Path(8)
knob rotates softly
3.Check remained Notes and substance
in the upper Transport Path
4. Check the GS007 Sensor
570F400
GM004 motor removal during
Withdrawal .
1. Open the lower unit
2. Check the knob rotates in the Mid
Transport Path(20)
3. Check the notes and substance
inside of the Mid Transport Path
4. Check the sensor GS023 status
570F500
Decreased encoder count of
GM001 moter less than
previous values during
Withdrawal.
1. Operate to initialize BRM(Recovery)
570F600
Decreased encoder count of
GM002 moter less than
previous values during
Withdrawal .
1. Operate to initialize BRM(Recovery)