Error Code Manual Chapter2. Bill Recycling Machine (BRM)
2-388
© 2014
Nautilus Hyosung Inc.
All Rights Reserved.
Code
Problem Description
Troubleshooting
5D0NC00
Failure to check the last note
at the termination of mid
transport path during Initialize.
1. Operate to initialize BRM(Recovery)
2. Reboot the system when same error
occurred (message timeout error) after
initialization
5D0Q100
UTC removal error during
Initialize.
1. Open the upper unit
2. Check removal of the cassette not
received(9)
5D0Q200
TE open error during Initialize.
1. Open the upper Unit
2. Check open/close of TE(12)
5D0Q300
BMU inter lock error during
Initialize.
1. Check Load/Removal of the upper
unit
2. Replace a cherry switch when error
occures
5D0Q400
BMU removal error during
Initialize.
1. Check Load/Removal of the upper
unit
5D0Q500
Safe door open error during
Initialize .
1. Check the safe door open
5D0Q600
CSM open error during
Initialize.
1. Open the upper unit
2. Check to open/close CSM
3. Check the sensors GS011
5D0Q700
RJC removal error during
Initialize.
1. Open the lower unit
2. Open the Mid Transport Path
3. Check the reject CST(21)
Load/Removal
5D0Q800
BMD inter lock error during
Initialize.
1. Check the lower Unit load/removal
2. Replace a cherry switch when error
occures
5D0Q900
BMD removal error during
Initialize.
1. Check the lower Unit load/removal
5D0QA00
BC open error during Initialize.
1. Open the upper unit
2. Open the customer service module
(CSM)
3. Check the lock lever in the BC
5D0R100
BM message timeout error
during operation ready in the
Initialize.
1. Operate to initialize BRM(Recovery)
2. Reboot the system when same error
occurred (message timeout error) after
initialization
5D0R200
BM message timeout error
during transaction operation in
the Initialize.
1. Operate to initialize BRM(Recovery)
2. Reboot the system when same error
occurred (message timeout error) after
initialization
5D0R300
BM message timeout error
during postprocessing to
Initialize error .
1. Operate to initialize BRM(Recovery)
2. Reboot the system when same error
occurred (message timeout error) after
initialization
5D10500
GS105 Light Jam during
Initialize.
1. Open the lower unit
2. Open the Mid Transport Path
3. Remove the Jam on the recycle
cassette(14)
4. Rotate the knob of the Mid Transport
Path
5. Remove the Jam on the Mid
Transport Path(13).