Error Code List Chapter4. Cash & Check In Module
4-88
© 2014
Nautilus Hyosung Inc.
All Rights Reserved.
Code
Problem Description
Troubleshooting
I3C0C
[Entry In/Out]AAS05 Light Timeout
fault
1. Alignment(4) Open
2. Alignment(4) part residual media
I3C0D
[Entry In/Out]AAS03 Light Timeout
fault
1. Alignment(4) Open
2. Alignment(4) part residual media
I3C0E
[Entry In/Out]RCS01 Light
Timeout fault
1. Alignment(4) Open
2. Alignment(4) part residual media
I3C0F
[Entry In/Out]FDS07 Light Timeout
fault
1. Remove the internal media and alien
materials in the Recognition(5).
2. If the same fault continuously occurs
after checking the device, replace the
Recognition(5) Module.
I3C10
[Entry In/Out]FDS23 Light Timeout
fault
1. Remove the internal media and alien
materials in the Recognition(5).
2. If the same fault continuously occurs
after checking the device, replace the
Recognition(5) Module.
I3C11
[Entry In/Out]FDS09 Light Timeout
fault
1. Open the BM2(7) Upper Guide and
remove the residual media and alien
material.
2. Open the BM3 moving path to remove
the residual media.
I3C12
[Entry In/Out]FDS12 Light Timeout
fault
1. Open the BM2(7) and then remove
the residual media and alien materials.
2. Check the 3Way-Gate1 operation
state (FDM06)
I3C13
[Entry In/Out]FDS18 Light Timeout
fault
1. Open the BM2(7) and then remove
the residual media and alien materials.
2. Check the 3Way-Gate1 operation
state (FDM06)
I3C14
[Entry In/Out]NCS07 Light
Timeout fault
1. Open the BM2(7) and remove the
residual media at the moving path (6)
and Cassette1(14) entry.
2. Execute initialization.
I3C15
[Entry In/Out]RJS08 Light Timeout
fault
1. Open the third moving path (8) and
then remove the residual media and
alien materials.
2. Check the 3Way-Gate2 operation
state (FDM07)
I3C16
[Entry In/Out]PRS01 Light
Timeout fault
1. Open the third moving path (8) and
then remove the residual media and
alien materials.
2. Check the 3Way-Gate2 operation
state (FDM07)
I3C17
[Entry In/Out]FDS16 Light Timeout
fault
1. Open the third moving path (8) and
then remove the residual media and
alien materials.
2. Check the 3Way-Gate2 operation
state (FDM07)
I3C18
[Entry In/Out]RTS02 Light Timeout
fault
1. Open the BM2(7) and remove the
residual media at the moving path (6, 7,
8, 9).
2. Remove the notes in the Retract Box.
3. Execute initialization.