Error Code Manual Chapter2. Bill Recycling Machine (BRM)
2-122
© 2014
Nautilus Hyosung Inc.
All Rights Reserved.
Code
Problem Description
Troubleshooting
540NC00
Failure to check the last note
at the termination of mid
transport path during Deposit
Cancel.
1. Operate to initialize BRM(Recovery)
2. Reboot the system when same error
occurred (message timeout error) after
initialization
540Q100
UTC removal error during
Deposit Cancel .
1. Open the upper unit
2. Check removal of the cassette not
received(9)
540Q200
TE open error during Deposit
Cancel .
1. Open the upper Unit
2. Check open/close of TE(12)
540Q300
BMU inter lock error during
Deposit Cancel .
1. Check Load/Removal of the upper
unit
2. Replace a cherry switch when error
occures
540Q400
BMU removal error during
Deposit Cancel .
1. Check Load/Removal of the upper
unit
540Q500
Safe door open error during
Deposit Cancel .
1. Check the safe door open
540Q600
CSM open error during Deposit
Cancel .
1. Open the upper unit
2. Check to open/close CSM
3. Check the sensors GS011
540Q700
RJC removal error during
Deposit Cancel .
1. Open the lower unit
2. Open the Mid Transport Path
3. Check the reject CST(21)
Load/Removal
540Q800
BMD inter lock error during
Deposit Cancel .
1. Check the lower Unit load/removal
2. Replace a cherry switch when error
occures
540Q900
BMD removal error during
Deposit Cancel .
1. Check the lower Unit load/removal
540QA00
BC open error during Deposit
Cancel .
1. Open the upper unit
2. Open the customer service module
(CSM)
3. Check the lock lever in the BC
540R100
BM message timeout error
during operation ready in the
Deposit Cancel .
1. Operate to initialize BRM(Recovery)
2. Reboot the system when same error
occurred (message timeout error) after
initialization
540R200
BM message timeout error
during transaction operation in
the Deposit Cancel .
1. Operate to initialize BRM(Recovery)
2. Reboot the system when same error
occurred (message timeout error) after
initialization
540R300
BM message timeout error
during postprocessing to
Deposit Cancel Error.
1. Operate to initialize BRM(Recovery)
2. Reboot the system when same error
occurred (message timeout error) after
initialization
5410500
GS105 Light Jam during
Deposit Cancel.
1. Open the lower unit
2. Open the Mid Transport Path
3. Remove the Jam on the recycle
cassette(14)
4. Rotate the knob of the Mid Transport
Path
5. Remove the Jam on the Mid
Transport Path(13).